472846
21
Zoom out
Zoom in
Previous page
1/27
Next page
20
Reverse Punching
This technique applies a piece of fabric or carded fiber
to the wrong side of a base fabric. The design will show
through on the right side of the base fabric.
1 Draw a mirror image of the design pattern with
tailor’s chalk on the wrong side of the base fabric.
q Wrong side of the base fabric
NOTES:
Felt or firm woven fabrics such as denim and tweed are
recommended for the base fabrics.
Avoid using soft, fine fabrics as they tend to be
punched into a hole.
2 Cut a piece of fabric to the shape of the design and
place it on the wrong side of the base fabric.
3 Lower the presser foot and close the finger/eye
guard. Punch a few spots on the fabric a few
times to attach it to the base fabric. Punch the
fabric evenly until the design appears on the right
side of the base fabric.
w Right side of the base fabric
WARNING– To reduce the risk of injury:
Be sure to close the finger/eye guard before you start
punching.
Do not open the finger/eye guard while punching.
TIP:
If you punch a printed fabric into the base fabric, the
pattern from the punched fabric will show through on
the right side of the base fabric.
NOTE:
Do not over-punch the same place, it may result in
damage to the fabric.
Always raise the needle unit when changing the
direction of the fabric.
4 After punching is finished, raise the needle unit and
presser foot then remove the fabric.
q
w
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome FM 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome FM 725 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info