472846
25
Zoom out
Zoom in
Previous page
1/27
Next page
24
Replacing the Light Bulb
WARNING– To reduce the risk of burn:
Turn the power switch OFF and unplug the machine
before replacing the light bulb.
The bulb could be HOT. Protect your fingers when
handling it.
Do not dismantle the machine other than explained in
this section.
1 Remove the cap and setscrew with a screwdriver.
Remove the face plate.
q Cap
w Setscrew
2 Push the light bulb up and twist it counterclockwise
to remove.
e Light bulb
3 Insert a new bulb into the lamp socket. Push the bulb
up and twist it clockwise.
4 Attach the face plate with the setscrew.
Attach the cap to the face plate.
q
w
e
Troubleshooting
Condition
The base
fabric is
punched into
a hole.
The needle
breaks.
The fabric
cannot be
moved
smoothly.
The machine
runs slow
and/or noisily.
The machine
does not run.
Cause
1. Over-punching the
same place
2. The base fabric is too
fine.
1. The needle unit is
incorrectly inserted.
2. The needle is bent or
blunt.
3. The needle clamp screw
is loose.
4. The fabric is pulled or
turned without raising
the needle unit.
1. The height of the
presser foot is too low.
1. Lint and dust have
accumulated inside of
the bed cover and
around needle bar area.
2. The base fabric is too
thick or too dense.
3. The needle is bent or
blunt.
1. The machine is not
plugged in.
Reference
See Page 16.
See Page 16.
See Page 12.
See Page 12.
See Page 12.
See Page 16.
See Page 12.
See Page 22.
See Page 16.
See Page 12.
See Page 10.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome FM 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome FM 725 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info