472825

Janome DC5100 Manual

25
Zoom out
Zoom in
Previous page
1/60
Next page
21
Manual stitch length
Press “–” or “+” to adjust the stitch length.
To decrease length, press “–”.
To increase length, press “+”.
The pre-programmed stitch length setting is suitable for
most of your sewing needs. However, you can change
these settings to accommodate different fabric
characteristics or achieve a desired effect. Hold down “–”
or “+” until you reach the desired setting.
* The reverse stitch length cannot be set longer than
1/8˝ (0.3 cm)
Sewing on heavy fabrics
q Fabric
w Black button
The black button w on foot A will lock the foot in a horizon-
tal position if you push it in before lowering the presser foot.
This ensures even feeding at the beginning of seams and
helps when sewing many layers of fabric such as sewing
over welt seams when hemming jeans.
When you reach the point of an increased thickness, lower
the needle and raise the presser foot. Press down on the
toe of the foot and push in the black button w, then lower
the foot and continue sewing.
This button will be released automatically after a few
stitches.
Variable needle position
These settings apply only to “straight” stitch patterns #1
through #3, #10, #11, #20, #30, #31, and #33 through #35.
NOTE:
When using the straight stitch foot, make sure to use
center needle position w. Otherwise the needle may
strike the sewing foot and possibly break.
qw e
30
31
34
33
35
3
3
01
02 03
10
11
20
q
w
When you select stitch patterns above, you can adjust the
left/right needle position. When you press “–”, the needle
position will move to the left. When you press “+”, the
needle position will move to the right.
q Left (0.0)
w Middle (3.5)
e Right (7.0)
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info