472831
8
Zoom out
Zoom in
Previous page
1/43
Next page
6
u
i
y
uu
uu
u Stitch length adjusting button
Press “+” or “–” to change the stitch length (see page 36).
The button is lit green and the indicator will show the stitch
length.
ii
ii
i Stitch pattern selection button
Press the desired stitch pattern selection button to
select the desired stitch.
(1) To select the pattern on the left side of pattern
selection button, press it once.
The button is lit green and the pattern on the left
side is selected.
(2) To select the pattern on the right side of pattern
selection button, press it twice.
The button is lit orange and the pattern on the right
side is selected.
* The indicator window will show the pre-set stitch length
of the selected stitch pattern.
* The alphabet under the stitch pattern indicates the
suitable presser foot type for the selected stitch
pattern.
Note:
Raise the needle above the fabric when selecting the
stitch pattern.
(1) (2)
tt
tt
t Elongation button
Stitches can be elongated up to five times
their normal length by pressing this button (see page
35).
t
r
Notes:
The Start/stop button cannot be used when the foot
control is connected to the machine.
If you start the machine with the presser foot up, the
Indicator window will show .
Lower the foot then restart the machine.
rr
rr
r Start/stop button
Press this button to start or stop the machine.
The machine starts running slowly for the first few
stitches; it then runs at the speed set by the speed
control lever. The machine will run slowly as long as this
button is pressed.
The button is lit green when the machine is stopped.
The button is lit red when the machine is running.
yy
yy
y Stitch width adjusting button
Press “+” or “–” to change the stitch width or needle drop
position (see page 18 or 21).
The button is lit green and the indicator will show the
stitch width or needle drop position.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info