472831
6
Zoom out
Zoom in
Previous page
1/43
Next page
4
q
w
r
t
y
SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
e
r
w
q
e
Operating Instructions:
The symbol “O” of a switch indicates the “off position of
a switch.
For appliances with a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
For Your Safety
* While in operation, always keep your eyes on the
sewing area. Do not touch any moving parts such as
the thread take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not
sewing.
Using the foot control
q Foot control plug
w Machine socket
e Power supply plug
r Power switch
t Machine plug
y Foot control
u Red mark
1. Turn off the power switch r.
2. Insert the foot control plug q, and machine plug t
into the machine socket w.
3. Insert the power supply plug e into the outlet.
4. Turn on the power switch r.
NOTE:
The start/stop button does not work when the foot control
is connected.
Before Using Your Sewing Machine
Before using your sewing machine for the first time,
place a waste fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.
Using the start/stop button
q Machine socket
w Power supply plug
e Power switch
r Machine plug
1. Turn off the power switch e.
2. Insert the machine plug r into the machine socket q.
3. Insert the power supply plug w into the outlet.
4. Turn on the power switch e
When the machine is turned on, the mark is lit after
one second, and the indicator window will show .
CAUTION:
Do not pull the foot control cord beyond the red mark u.
u
6


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info