472831
7
Zoom out
Zoom in
Previous page
1/43
Next page
5
Machine Operating Buttons
q
w
e
q
w
r
t
e
u
y
i
Controlling Sewing Speed
Sewing speed is varied by the foot control.
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully de-
pressed.
Operating Instructions:
Foot controller Model 21317 is for use with this sewing
machine.
Speed Control Slider
Sewing speed can be varied by the speed control Slider
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
q q
q q
q Up/down needle position button
Press this button to set the needle position up or down
when the machine stops. The machine will stop with the
needle up or down depending on the needle position
determined by this button.
The button is lit orange when needle position is set
down position.
e e
e e
e Reverse stitch button
When stitches are selected, the machine will
sew in reverse while the reverse stitch button is pressed.
If you press the reverse stitch button when sewing other
stitches (except ), the machine will
immediately sew locking stitches and automatically stop.
If you press the reverse button when stitch pattern
has been selected and the foot control is not connected,
the machine will start sewing in reverse as long as the
button is pressed and the machine will stop when the
button is released.
The button is lit red until locking stitch is automatically
stopped.
w w
w w
w Auto-lock button
When stitches are selected, the machine will
immediately sew locking stitches when the Auto-lock
button is pressed, then automatically stop. When sewing
other stitches (except ), the machine will
sew locking stitches at the end of the pattern being sewn
and automatically stop.
The button is lit green until locking stitch is automatically
stopped.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info