641102

Janome DC2030 - JNH1860 Manual

26
Zoom out
Zoom in
Previous page
1/44
Next page
24
q
ew
Overedge Stitch
q Stitch pattern: 09
w Thread tension dial: 3 to 7
e Presser foot: Overedge foot C
This stitch pattern combines the straight and the zigzag
stitches, using the overedge foot, to seam and overcast
in one step.
It is ideal for 1/4˝ (0.6 cm) seams on knits (when
attaching ribbing) or on medium to heavyweight woven
fabrics where you want a narrow seam.
Place your fabric so that the raw edges fit under the wire
guides and touch the black ridge.
NOTE:
Stitch width should be set between 5.0 and 7.0.
The blue tipped needle is recommended for stretch
materials.
q
ew
Overcasting with Zigzag Stitch
q Stitch pattern: 07
w Needle thread tension: 3 to 7
e Presser foot: Overedge foot C
q
ew
Multiple Zigzag
q Stitch pattern: 08
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot A
This stitch is used to finish seams on synthetics and
other fabrics that tend to pucker. The stitch is also
excellent for darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the
stitches.
This zigzag variation is very useful in garment
construction and in finishing raw edges of any sewing
project.
The black ridge and the guide wires on the overedge
foot keep the edge neat and the fabric straight.
Place your fabric so that the double guide wires come
to the edge. The machine will stitch over these wires.
The black ridge will keep loose threads in so that
the needle can stitch over them.
As you sew, be sure your fabric edge pushes up against
the black ridge.
NOTE:
Stitch width should be set between 5.0 and 7.0.
The blue tipped needle is recommended for stretch
materials.
… 26 …


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc2030---jnh1860

Reset search

  • Are the Janome JNH1860 AND THE JNH2030 the same machine? Submitted on 23-1-2023 at 21:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2030 - JNH1860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2030 - JNH1860 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info