602049
13
Zoom out
Zoom in
Previous page
1/52
Next page
11
Winding the Bobbin
Removing the bobbin
Slide the hook cover release button to the right, and
remove the hook cover.
Take the bobbin out.
Hook cover release button
Hook cover
Bobbin
Setting the spool of thread
Place the spool of thread on the spool pin with the thread
coming off the spool as shown.
(A) For an ordinary spool: Use the large spool holder.
Large spool holder
(B) For a narrow or small spool: Use the small spool
holder.
Small spool holder
Winding the bobbin
NOTE: Set the speed control lever at ( ) for bobbin
winding.
Guide the thread around the bobbin winder
thread guide.
Guide the thread around the thread guides (A), (B)
and bobbin winder thread guide.
Insert the thread through the hole on the bobbin,
threading from the inside to the outside. Put the
bobbin on the bobbin winder spindle.
Thread guide (A)
Thread guide (B)
Bobbin winder thread guide
Bobbin winder spindle
Push the bobbin winder spindle to the right.
With the free end of the thread held in your hand,
depress the foot control. Stop the machine when the
bobbin has made a few turns, and cut the thread close
to the hole on the bobbin.
NOTE: The LED display shows “ ” when sifting the
spindle to the right.
Bobbin winder stopper
LED display
Depress the foot control again. When the bobbin is
fully wound, it will stop automatically. Return the
bobbin to its original position by moving the spindle to
the left, and cut the thread as shown.
NOTE: Do not move the bobbin winder spindle while the
machine is running.
Additional spool pin
Insert the additional spool pin and spool stand into the
hole on the machine. Place the felt and spool on the
spool pin as shown.
Additional spool pin
Felt
Spool stand
Hole for the additional spool pin
(A)
(B)
1
2
3
1
2
1
2
3
1
2
1
2
3
4
5
6
1 2
3
4
3
2
1
4
5
6
7
8
9
10
10
1
2
3
4
7
8
9
10
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info