602049
12
Zoom out
Zoom in
Previous page
1/52
Next page
10
Changing the Needles
WARNING: Turn OFF the power switch before changing
the needle.
Loosen the needle cramp screw and pull out the
needle.
Insert a new needle into the needle cramp with the
flat side facing back.
Push the needle up against the stopper pin and
tighten the needle cramp screw firmly.
Needle cramp screw
Stopper pin
Flat side
To check the needle:
Place the flat side of the needle onto something flat
(needle plate, glass etc)
The clearance between the needle and the flat surface
should be consistent.
WARNING: Never use a bent or blunt needle, which can
cause it to break.
Clearance
1 2
2
1
1
3
4
1
2
1
2
3
4
Selecting Threads and Needles
Light
Medium
Lawn
Georgette
Tricot
Wool, Synthetic
Cotton, Synthetic
Fine jersey
Wool
Denim
Jersey
Coating
Quilting
Thread
Silk #80-100
Cotton #80-100
Synthetic #80-100
Silk #50
Cotton #60-80
Synthetic #50-80
Cotton #50
Silk #50
Cotton #40-50
Synthetic #40-50
Silk #30
Needle
#9/65-11/75
#11/75-14/90
#14/90
#14/90-16/100
#16/100
Fabric
* For general sewing, use needle size #11/75 or #14/90.
* A fine thread and needle should be used for sewing lightweight fabrics, so the fabric will no be marred. Heavy
fabrics require a needle large enough to pierce the fabric without fraying the needle thread.
* Always test the thread and needle size on a small piece of fabric, which will be used for actual sewing.
* In general, use same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and synthetics, use a BLUE TIPPED needle. The blue tipped needle
effectively prevents skipped stitches.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info