602049
11
Zoom out
Zoom in
Previous page
1/52
Next page
9
Raising and Lowering the Presser Foot
The presser foot lifter raises and lowers the presser foot.
You can raise it about 0.6 cm (1/4˝) higher than the
normal up position for easy removal of the presser foot,
or to help you to place thick fabric under the foot.
Lowered position
Normal up position
Highest position
Balancing Thread Tension
Auto tension
This machine features the Auto setting in the tension
control, which covers wide range of sewing condition. Set
the tension control dial at “Auto” for general sewing,
unless specifically indicated in this manual.
Correct tension:
The ideal straight stitch has threads locked between two
layers of fabric.
For an ideal zigzag stitch, the bobbin thread does not
show on the right side of the fabric, and the needle thread
shows slightly on the wrong side of the fabric.
Tension control dial
Setting mark
Needle thread
Bobbin thread
Right side of the fabric
Wrong side of the fabric
Manual tension adjustment
Manual tension adjustment may be needed depending on
the sewing materials, layers of fabric and other sewing
conditions.
Needle thread tension is too tight:
The bobbin thread will appear on the right side of the
fabric.
Loosen the needle thread tension by moving the dial to a
lower number.
Needle thread tension is too loose:
The needle thread will appear on the wrong side of the
fabric.
Tighten the needle thread tension by moving the dial to a
higher number.
9
0
Auto
4
3
2
6
5
4
1
2
3
1
2
4
3
5
6
3
5
4
6
1
2
3
5
4
6
1
2
1
2
3
1
2
3
4
5
6
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info