554896
6
Zoom out
Zoom in
Previous page
1/12
Next page
Telephone dialer TD-101 / TD-101W - 6 - MDJ512 10 Telephone dialer TD-101 / TD-101W - 19 - MDJ512 10
6. Voice & pager messages setting
Phone numbers, voice messages and Pager numbers & messages can be set in the USER MODE
6.1. How to open USER MODE
Enter User Code (factory setting is 1234) to open the user mode. The user mode is indicated by the
green LED.
All parameters are programmed in the following sequences. If the first key of the sequence is entered,
the red LED will start to flash. When the sequence is completely entered, the red LED will turn off (data will
be stored). A started sequence entering can be terminated by pressing the
E key at any time.
After all programming the user mode must be finished by pressing the
Ekey (all the LEDs will turn off).
The dialer can not be activated in the user level !
6.2. Entering telephone numbers for voice messages sending
Telephone numbers can be entered in the user mode (the green LED is ON - see 6.1.). The dialer
has 4 memories
Mem1 to Mem4 which are for voice messages dialing. Telephone numbers can be
entered including an area code number for long distance calls. The dialer can also be used to call a
mobile phone. To program telephone numbers, enter :
DDDD
...
D
M
E
where:
D is a telephone number, keys
to
or
B
i.e. pause. Pause can not be in the first position.
Keys
and
can also be programmed in tone dialing mode. Each telephone number can
have up to 16 digits.
E
indicates into which memory (1 to 4) the tel. number will be stored.
When IN1 is triggered, voice message no 1 is sent to Mem1 and Mem2; when IN2 is triggered,
message no. 2 is sent to
Mem3 and Mem4. Remote control button or F key pressing has the same effect
as IN2 triggering. If both inputs, IN1 and IN2, are triggered simultaneously, the dialer will react the same
way as the IN1 is triggered at first and the IN2 after that.
Example: Telephone number 02 311603 will be stored into memory Mem2.

B

M
6.3. Voice messages recording
Voice messages can be recorded in the user mode (the green LED is ON - see 6.1.). To record a
message, enter:
M
E
where:
E
is the message number
or
- press and keep down the number key while speaking in to the
microphone (max. 10 sec). The message will be played back automatically for 40 seconds when
you release the button (can be stopped with
Ekey). The voice messages can also be played in
stand by mode, after entering
M
for the first and M
for the second message.
Note: If only one message (20 sec.) is selected in the installer level, record it as message no.1.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron TD-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron TD-101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info