554896
7
Zoom out
Zoom in
Previous page
1/12
Next page
Telephone dialer TD-101 / TD-101W - 18 - MDJ512 10 Telephone dialer TD-101 / TD-101W - 7 - MDJ512 10
6.4. Entering telephone numbers and data for PAGER
Telephone numbers and data can be entered in the user mode (the green LED is ON - see 6.1.),
entering:
DDDD
...
D
M
E
where:
D
can be
to
or
B
i.e. pause. Pause can not be used as a first digit. You can enter a
maximum of 26 digits. If the
Fkey is entered, it will make a long pause and will switch for tone
dialing if pulse dialing is selected (so
Fkey should be used as a message code separator),
and
can also be dialed if tone dialing method is selected
E
is the tel. number memory
or
(with IN1 triggering, the number Mem5 will be dialed, with
IN2 triggering the number
Mem6 will be dialed). Remote control button or Fkey pressing has
the same effect as IN2 triggering. If both inputs IN1 and IN2 are triggered simultaneously, the
dialer will call the first pager according to
Mem5 and then the second pager according to
Mem6.
Example:

F „Pager number“
„message“

M
E
Format of the pager number and data can be different, check details with your PAGING provider.
6.5. Deleting telephone numbers
Telephone numbers for voice & pager messages can be deleted in user mode (the green LED is ON
- see 6.1.), entering:
B
M
E
where:
E
is the memory number 1 to 6 which will be erased. If a number is erased, the corresponding
dialing will not be performed
Example: Deleting of telephone number from memory Mem3 :
B
M
6.6. Remote control code learning (only for model TD-101W)
A new remote control can be taught to the dialer in the user mode (the green LED is ON - see 6.1.),
entering:
M
After entering M
the dialer is in the remote control learning mode. Activate all the remote controls
(max. 3) one by one. Learning of the remote control is confirmed with a beep. Close the learning mode
by pressing the
Ekey (learning of the third remote control will close it automatically). Closing is
confirmed with two beeps. Both buttons of the remote control have the same function.
Note: when the first remote control is taught in the learning mode, all previous remote controls are
forgotten.
6.7. Erasing of remote controls (only for model TD-101W)
All remote controls can be erased from the TD-101W memory in the user mode (the green LED is
ON - see 6.1.), entering:
M
B
Note: This instruction can be used if you lost your remote control.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron TD-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron TD-101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info