631258
10
Zoom out
Zoom in
Previous page
1/13
Next page
The JA-82Y GSM communicator installers manual 10/10 MDL51108
11. List of events which can be reported to your phone and their factory default settings
Telephone number memory - M
ABC AC BC ABC
uu Event
1 2 3 4 5 6 7 8 Voice message
00 Alarm after powering up the system
SC SC SC S SC SC S
5: “fault“
01 Instant loop alarm SC SC SC S SC SC S 1: “intruder alarm“
02 Delayed loop alarm SC SC SC S SC SC S 1: “intruder alarm“
03 Fire alarm SC SC SC S SC SC S 2: “fire alarm“
04 Panic alarm SC SC SC S SC SC S 4: “panic alarm“
05 Tamper alarm SC SC SC S SC SC S 3: “tamper alarm”
06 Number of permitted incorrect code-entries exceeded SC SC SC S SC SC S 3: “tamper alarm”
07 Device fault S S 5: “fault“
08 Complete setting ”Armed system“
09 Complete unsetting ”Disarmed system“
12 Codeless setting ”Armed system“
13 Partial setting A ”Partially armed“
14 Detector communication failure 5: “fault“
15 Control panel power supply dropout 7: “other event“
16 Control panel power supply restored 7: “other event“
17 Detector power supply dropout S S 5: “fault“
18 Communicator failure S S 5: “fault“
19 Communicator OK 7: “other event“
20 Control panel battery failure S S 5: “fault“
21 Control panel battery OK 7: “other event“
23 Alarm 24h SC SC SC S SC SC S 1: “intruder alarm“
24 Receiver jamming 5: “fault“
26 Setting A – split system ”Armed system“
27 Setting B – split system ”Armed system“
28 Unsetting A – split system ”Disarmed system“
29 Unsetting B – split system ”Disarmed system“
33
Partial setting AB
”Partially armed“
50 Low SIM card credit balance S 5: “fault“
51 Image delivered to server (e.g. from JA-84P) S 7: “other event“
64 Power supply ON 7: “other event“
65 Switching to service / maintenance mode 7: “other event“
66 Exiting service / maintenance mode 7: “other event“
67 End of alarm indication 7: “other event“
78 Alarm cancelled by user S S S S S S S 7: “other event“
79 Control panel reset 7: “other event“
80 All tampers on standby 7: “other event“
81 All faults removed 7: “other event“
82 System power supply OK 7: “other event“
83 The communicator has no connection 5: “fault“
84 Communicator connection restored 7: “other event“
85 Master code reset to 1234 7: “other event“
86 Master code changed 7: “other event“
68 Reporting to ARC1 7: “other event“
69 No reporting to ARC1 5: “fault“
89 Power supply failure exceeding 30 minutes S 5: “fault“
90 Unconfirmed alarm 7: “other event“
91 Service request 7: “other event“
92 PgX output ON 7: “other event“
93 PgX output OFF 7: “other event“
94 PgY output ON 7: “other event“
95 PgY output OFF 7: “other event“
96 Blocking after an alarm (Engineer reset) 7: “other event“
97 Unblocking after an alarm 7: “other event“
tab. 5 List of events which can be reported to your phone and their factory default settings
Notes:
Factory default report assignment: S = SMS, C = call, SC = SMS followed by a call
“External communication fault“ means a GSM network dropout longer than 15 minutes (if GSM network dropout indication is enabled)
To get an SMS (from the JA-84P) with a picture link, enable event 51
In a split system it is necessary to synchronize the current control panel settings by opening enrollment mode for 1 s and closing it before you leave service mode
In a split system telephone memory positions are associated with certain sections for reporting alarms as below:
o 1st telephone number: sections A, B, C (administrator/master)
o 2nd to 4th telephone numbers: sections A, C
o 5th to 7th telephone numbers: sections B, C
o 8th telephone number sections: A, B, C (service technician)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-82Y GSM communicator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-82Y GSM communicator in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-82Y GSM communicator

Jablotron JA-82Y GSM communicator User Manual - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info