After successfully testing all detectors, we recommend that you record the
location of the sensors directly on the control panel (area under the LED dis-
play). A suitable marker for this is provided. If you need to erase your record,
use a tissue dipped in rubbing alcohol.
You can also record the location of the detectors on the user instruction
card, and in the Comlink software as well. (See software instructions)
6. Finishing of the installation
•Check that all detectors and other items have their covers attached.
•If the control panel has a built in telephone dialer, record your voice mes-
sage and program the desired telephone numbers (see part 9).
• We recommend to set the date and time in the control panel (see part
8.21.); The control panel stores all events to an events list in its internal memory, including the date and time of the
event. The details from the memory can be viewed any time in the future via a connected PC and Comlink software.
The PC can also be used for convenient setting of the control panel.
Fig. 13
•The system has a factory default setting, which allows you to use it without any other additional programming. If you
want to customize the control panel setting, see part 8.
•Change the system Service Code to protect against unauthorized access to the programming mode (see part 8).
•Exit the programming mode by pressing the N key. The control panel will then enter the disarm mode. See the user
instruction card for information on how to operate the system.
•If you have troubles with your system, see the Trouble shooting table in part 17.
Note: during testing and normal operation you should be aware of the following function: if four alarms are triggered from
the same detector during the arming period, the detector will be bypassed automatically for the rest of the arming period.
This feature prevents unlimited number of alarms (and possible conflict with your neighbors!) when for example improp-
erly closed doors inside the house are repeatedly moved by the wind. Such a bypass of problematic detector is reset with
the disarming of the system.
This is the end of the basic installation procedure.
6.1. Specifications:
control panel power 15V
∼
, 0.2A, 50Hz (adapter SELV)
back up battery 12V, 1,3Ah
back up power output 13.8V, max. 50mA (permanent load), max. 1A (10 minutes)
number of zones (detectors) 16
number of controllers max. 8
Notes for JA-60X dialer use in European countries:
Equipment is listed under the name of product: Wireless
alarm system JA-60 "Comfort"
Equipment is designed to work with networks according to
TBR 21 and tested according to EG 201 121 V1.1.3, Jan.
2000 including Advisory Notes for following countries: Ger-
many, Norway, Switzerland
Equipment was not tested according to advisory additional
notes for: Greece, Portugal and Spain
Equipment may have interworking difficulties with the local
networks requiring current limitation as in France
Italy's legislation requires that use of SDR is subject to li-
cense.
events memory 127 latest events incl. date and time information
built in siren 116dB
working frequency 433.92 MHz (optional)
RF approved according EN 300 220
complies with EN 50131-1, 50131-6
telephone dialer* voice message to 4 numbers
numeric message to a Pager
digital communication to a monitoring station
approved according* TBR21
electrical safety and EMC EN 41003 (EN 60065), ETS 360683
working environment indoor use, -10 to +40°C
* only for control panels equipped with the telephone dialer module
* can be connected to analogue interfaces TBR 21/1998, EG 201 121 V1.13/2000, AS/ACIF S002/2001 (Australia)
Hereby, Jablotron Ltd., declares that this JA-60is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.
Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this product does not contain any harmful materi-
als we suggest you to return the product to the dealer or directly to the producer after usage.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jablotron JA-60 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jablotron JA-60 in the language / languages: English as an attachment in your email.
The manual is 2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
