607101
15
Zoom out
Zoom in
Previous page
1/20
Next page
- 15 -
Night vision
The EyeSee can see not only visible light but as a professional security camera it has excellent
sensitivity also in the infra-red spectrum, which is invisible to the human eye. When dark the
camera switches ON its infrared lights to invisibly illuminate the scene.
Tips:
Pictures taken in infrared light are black and white.
When its internal IR lamp is used there must NOT be anything in close distance in front of the
camera as it’s reflection would dazzle the camera.
The built-in infrared light is designed for indoor use and its power may not be sufficient for
outdoor usage. Read more about additional IR lamps installation for outdoor use
atsupport.jablocom.com/eyesee.
Outdoor installation
The EyeSee can be installed outdoors. Ensure that it is protected from permanent exposure to
direct rain or snow, e.g. by a small shelter.
Tips:
Some of the detectors should be disabled for outdoor use. For example the noise or touch
detector may be triggered by wind and cause false alarms.
The USB cable must be disconnected from the camera body and the USB connector on the
back side must be protected by the rubber seal.
For more information about outdoor installation see application notes at support.jablocom.
com/eyesee.
Wireless peripherals
The EyeSee camera can be used with wireless peripherals that extend the camera’s functionality
(more at www.jabloshop.com). Examples of compatible devices:
Panic button (RC-87)
Camera sends alarm report
when someone presses the
button.
Fire detector (JA-80S)
Detector sounds and camera
reports alarm to mobile phone
when there is a fire or smoke.
Internal siren (JA-80L)
Sounds when camera reports
activity in the protected area.
Smart socket (AC-88)
Camera can remotely turn the
socket ON or OFF.
Other features
The EyeSee turns its image up-side-down when it is mounted on the ceiling.
An internal buffer will allow you to always view the proceeding 6 seconds to any alarm.
To get current picture from the camera send text message “picture” to the camera and you will
soon receive an MMS from the camera. To get status of the camera, use text message “status”.
If the text message command is sent from a mobile phone which is not saved as a contact
in your camera, it must be proceeded by the camera’s password, otherwise it will be ignored.
The default camera password is “0000”. If you changed the camera password during the
installation then replace the default camera password “0000” with your own password.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom EyeSee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom EyeSee in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablocom EyeSee

Jablocom EyeSee User Manual - German - 20 pages

Jablocom EyeSee User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info