607101
14
Zoom out
Zoom in
Previous page
1/20
Next page
- 14 -
7. Advanced
Security detectors
The EyeSee uses advanced technology and 7 types of detectors to recognize movements,
sounds, vibrations, breaking of glass or opening of doors in a protected area.
Detectors’ settings are professionally tuned to provide the best quality of detection while keeping
sufficient resistance against false alarms. The installation wizard configures the detectors according
to your planned use of your camera (indoors/outdoors).
Note: Please note that some of the detectors are designed for indoor use and using them outdoors may cause
unwanted false alarms – i.e. noise detector may be triggered by wind.
Detectors are optimized to protect an area up to 10 x 10 meters.
Infrared motion detector (PIR)
is a very sensitive detector of thermal
activity. It detects the heat of a human
body or the hot engine of a car.
Tilt detector (TILT)
notices even very small change
of camera´s position, e.g. during
unwanted manipulation with the
camera. This is reported as tampering
alarm.
Motion-In-Picture detector (MIP)
constantly analyses the scene and
detects any changes in the picture. You
can mask-out (hide) a part of a picture
where changes will not be detected (e.g.
street traffic, window).
Touch detector (TOUCH)
responds to micro vibrations of
camera body caused e.g. by touching
the camera by hand. Touch detector
should be switched off outdoors. This
is also reported as tampering alarm.
Glass break detector (GBS)
permanently listens to all sounds and
digitally determinates the characteristics
of window breaking. It should be used
for indoor installations only.
Noise detector (NOISE)
uses a microphone to check the
surrounding area for any sound above
the usual level.
Door opening detector (DOOR)
sensitively checks the small pressure changes which are characteristic mark of door or
window opening. It should only be used indoors.
The sensitivity of each detector may be tuned in JabloTool.com (Settings/Advanced/Detectors). You
may even completely disable some detectors if needed.
When any of the detectors is activated while EyeSee is Watching then the camera starts recording
video and reports alarm.
SD card
The EyeSee records video on a SD memory card. It comes with a 2 GB memory card
installed, that allows to store about 3 hours of continuous video record. Thanks to
sophisticated method of recording, when only moving parts of image are saved, the real
recording time is much longer. Usually the camera stores about three days history.
Tips:
The EyeSee automatically overwrites the oldest records. Your SD card never gets full.
The size of one frame (single picture in film strip) fluctuates from 40 to 80 kB. Night pictures
are usually twice as large as a day picture.
If needed, you can further extend recording time by SD card upgrade (up to 32 GB micro SD).
Please see support.jablocom.com /eyesee for detailed instructions.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom EyeSee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom EyeSee in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablocom EyeSee

Jablocom EyeSee User Manual - German - 20 pages

Jablocom EyeSee User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info