579065
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
- For the first hour, the chronograph shows minutes, seconds and 1/100-seconds, then it shows hours, minutes
and seconds.
* Leading zeros will not be shown in the display.
- One split time may be measured.
* When you take the split time, the display will be frozen for approx. 4 secs to show the split time. After this, the
display changes back to the running chronograph automatically.
To measure elapsed time
1. Press A to start the chronograph.
2. Press B to stop the chronograph.
* You can resume the measurement operation by pressing A.
To measure split time
1. Press A to start a time measurement.
2. Press A again when you want to take the split time.
3. Press A again when you want to take the next split time.
* You may take only one split time and this is not memorized, only shown for 4 secs on the display.
4. Press B to stop the time measurement.
To clear time in current run
1. Press B to stop the chronograph.
2. Hold down D until the chronograph shows all zeros.
* Time in current run is cleared.
Activate the Heart Rate Monitor in the CHRONO Mode
- The HRM is activated automatically when you start the chronometer
- When no chronometer is running, you may activate the HRM by pressing the key D
- When the HRM is active, a heart icon will be shown on the display. As soon as a signal is received, this icon starts
to blink. The received pulse rate will then be shown after a few seconds in the display.
- If no signal is received for about 1 minute, the HRM will deactivate itself automatically (heart icon disappears from
display). By pressing key D you may activate it again.
- When the training zone and (!) the training zone alarm are ON, the watch will give a sound every 5 seconds once
your pulse is out of the training zone . If below (LO): 1 beep, if above (HI) 2 beeps.
Settings for the Heart Rate Monitor
To enter the setting mode for the HRM functions, press and hold key D until the display shows „HR Zone“. Before
this, you will clear the time of your last run (if STW is not 00:00:00) and then, by still holding key D pressed, you will
see USER HOLD SET
Once in the setting mode, the function to adjusts blinks and you may change it by pressing the keys A or B.
By pressing key C, you are getting from function to function.
Press key D to accept all settings and leave the setting mode.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox XL P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox XL P in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox XL P

Irox XL P User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info