579065
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
7. ALTIMETER MODE
Use C to enter Altimeter mode.
* Mode prompt “ALTI” is displayed first.
- Altimeter mode indicator is shown.
- The altimeter is of 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000
meters (29520 feet).
- Altitude reading in meters or feet selectable.
- Graph showing the changes in altitude is provided.
* Graph will be cleared only after battery replacement or reset.
- Maximum 20 altitude data can be stored.
Reading the altitude graph
The altitude graph shows the relative changes in altitude in the past with the current altitude represented on the
right. Each horizontal point represents 15 minutes while each column represents the relative reading of altitude
in that time.
* It is not possible to get the exact reading from the graph. User can only get the trend of changes from the graph.
To switch between meters and feet
Hold down B until the unit indicator (M or Ft) stops flashing to switch altitude reading between meters and feet.
To store altitude data
Hold down A until “DATA” stops flashing to store the current altitude data.
* “STORED” and data number are shown.
To calibrate altitude reading
1. Hold down D until the current altitude reading starts to flash on the display (Text "HOLD", then in the top line
"CAL"). This indicates the setting screen.
2. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed.
3. Press D to exit the setting screen.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to Altimeter mode
automatically.
Display of the accumulated altitude change (ACC) and the maximum measured altitude (MAX)
By pressing the key A in the Altimeter-Mode, the top line in the LCD will show a moving text with the accumulated
altitude changes and the highest measured altitude.
In the calibration mode (see above in "to calibrate altitude reading"), you may reset the two values to zero. While in
the CAL mode, press the key C. The relevant setting will be shown in the top line of the LCD:
MAX: Press key A or B to reset the max value to zero. Then press again key C.
ACC: Press key A or B to reset the accumulated value to zero
The MAX and ACC memory will start to record again as soon as a pressure change is registered.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox XL P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox XL P in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox XL P

Irox XL P User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info