509862
15
Zoom out
Zoom in
Previous page
1/38
Next page
En
11
Decoder
You can congure the parameters of Video and Audio of the program decoded
by AV decoder.
Program: Under this sub menu, you will see all program names detected by
4000P. The programs could be coming from ASI input, Tuner, TS/IP input or the
internal CI de-encryption block. Use the <↑> or <↓>-key to roll up or down be-
tween the program names, and use <←>-and <→>-key to switch among input
sources. The character in front of the program name indicates the input source.
For example:
A-xxxxx: the program comes from the ASI input.
T-xxxxx: the program comes from the TUNER input.
I –xxxxx: the program comes from the TS/IP input
C-xxxxx: the program comes from the internal CI functional block.
(xxxxx is the program name)
A few seconds after the program being selected, the A/V signal will be delivered
to the related connectors on the back panel.
Video: You can congure the video parameters of programs in this submenu.
Press the <ENTER>-key to conrm and press the <EXIT>-key to cancel.
Video Standard: You can select Auto or SECAM or NTSC or PAL for the com-
posite video output.
Screen: Select the screen mode: Auto, 4:3 Full, 16:9 Full or 4:3 Letterbox.
DVB Subtitle Lang: Select the language of DVB Subtitle.
EBU Subtitle Lang: Select the language of EBU Subtitle.
Subtitle Priority: Congure the priority of Subtitle; choose whether DVB or EBU
should be rst.
Fail Mode: Set display method on TV when there is no vedio. you can select
Black screen, Still picture, or No sync
Close Caption: SelectOFF’ will turn off the caption and select ‘ON’ will turn on
the caption.
VBI Mode: Select ‘DISABLE’ will disable the VBI mode and select ‘ENABLE’ will
enable the VBI mode.
Audio: You can congure the audio settings in the submenu.
Audio Level: Use the <↑> <↓> <←> <→>-keys to modify the audio level within
this range: 0~99.
Audio Mode: Select Stereo, Left, Right or Mono for soundtracks.
Audio Language: Select the language of the audio.
Biss:It includes Biss Mode, Biss 1 Setup and Biss E Setup
Biss Mode: Set Biss mode, can select ‘OFF’, ‘Biss E’ or ‘Biss 1’
Biss 1 Setup: Set Biss 1 (password is required)
Biss E Setup: Set Biss E (ID number and password are required)
ASI
ASI Source: Press the <ENTER>-key and use the <↑> or <↓>-key to roll up or
down to select the signal source of ASI output. There are 4 type of signal source
optional:
CI De-encrypted: The de-encrypted transport stream from CI functional block
will be delivered to the ASI output port on the back panel.
TUNER: The transport stream from Tuner block will be delivered to the ASI out-
put port on the back panel.
ASI Input: The transport stream comes from ASI input port will be delivered to
the ASI output port on the back panel.
Mux TS: The transport stream comes from internal Mux / Filter functional block
will be delivered to the ASI output port on the back panel.
(The Mux TS is valid only when the Mux/Filter function block is enabled and
turned on. The Mux TS indicates not only the after-multiplexed TS when Mux is
enabled, but also the after-ltered TS when the lter is enabled.)
Press <ENTER>-key to save or press <EXIT>-key to discard. A few seconds
after the source is selected, the TS will be delivered to the ASI output port on
the back panel.
ASI Package Length: you can congure the package length of ASI output as 188
bytes or select Bypass.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDLV-4000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDLV-4000P in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info