459176
18
Zoom out
Zoom in
Previous page
1/124
Next page
En
15
Besides the programme that is received from the TV station, your
digital receiver is able to display different information on your TV
screen like: Volume bar, Menu, Pop-ups… All those things are used
as an interface between the receiver and the user (also called GUI
- Graphical User Interface or OSD - On Screen Display). The actual
GUI display generated by your receiver may differ slightly from
those shown on the picture, as continuous updates of the software
may alter the appearance or even the structure of the menus.
Navigation within the GUI display is effected by the four directional
keys and “OK” key, which is used to conrm a selection, as well as
in some cases by means of the coloured function keys.
To enter into main menu, press “Menu” on your remote control.
Being in a menu and pressing “Menu” key you will completely exit
from all the open menu pages. Using “Exit” key you will exit only from the last open menu page.
Settings
To access “Settings” press “Menu” and then select “Settings.” You
may select the type of settings using the navigation keys or the
corresponding number keys. In this chapter, all options of the
settings menu will be described.
Note: In the options you can also use navigation “Left” and “Right”
key to change the settings (not for all settings).
AUDIO/VIDEO SETTINGS
This is where you can set the basic audio and video parameters of
your digital receiver related to connections on rear panel.
TV Resolution
Use this option to set the resolution of the display.
TV SCART
Use this option to specify the video output type on the TV
SCART connector.
VCR SCART
Use this option to specify the video output type on the VCR
SCART connector.
Aspect Ratio
Use this option to specify the screen aspect ratio of the
connected TV set – 4:3 or 16:9.
Aspect Ratio Conversion
Set to Auto in order to adopt the Aspect Ratio of the picture to
match with the aspect ration of the broadcast.
Digital Audio Out
Use this option to specify desired audio type on the digital
audio output (SPDIF). This option is valid for the optical and
coax outputs.
OSD over VCR SCART
Use this option to specify if you want to have the OSD appear on the VCR SCART outputs.
Note: This option is available only if TV SCART is set to RGB.
TIME / DATE
Use this menu to set the time and date.
Automatic Time Update
If the “Automatic Time Update” is set to “On”, the receiver will receive the time and date automatically from the
The Main Menu
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL5550S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL5550S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info