Manual Inverto IDL5550S (page 17 of 124) (English, German, Dutch, French)

459176

Zoom out

Zoom in

1/124

STANDBY MODE

You can put the receiver in standby mode to reduce the power consumption while the unit is not in use. The

standby mode turns off some parts of the receiver, but does not fully turn off the receiver, allowing it to start up

again very quickly when the unit is turned on. When in standby mode, the standby LED indication will be shown

on the front panel.

Note: To reduce power consumption to zero, switch off the receiver using the power switch on the rear panel.

USB

Your digital receiver is equipped with 2 USB connections - one at the front panel behind the ap and one at the

back panel – however only one port is active at the time and the two ports cannot be used simultaneously. The

Built-in USB controller supports the USB 2.0 standard.

CONNECTING AN EXTERNAL USB 2.0 MASS-STORAGE DEVICE

(I.E. EXTERNAL USB DRIVE)

When you connect a mass storage class device, the receiver will

automatically show a message for the initialisation of the device.

If you want to use the other USB port, you have to unmount the

connected device rst. To unmount, press the Library key on the

remote control and then use the “Blue” or “Green” function key to

unmount the connected device.

Mounting mass storage devices allows the following Recording

and Playback features:

Time shift (Pause Live TV)•

Record•

Playback – of MPEG2/4 recordings, JPEGs and MP3 les•

Instant Replay•

Note: supported le systems - Fat16, Fat32, Ext2, and Ext3.

RECORDING AND PLAYBACK

Time shift

If you are interrupted while watching a TV program, just press the “Pause/Play” key. From this moment, your

programme will be recorded on the external USB hard disk drive. On the screen, you will see a frozen picture,

like the one you have when you press pause on a VCR, as well as the time-shift counter. By pressing the

“Pause/Play” key again, the programme will start again, continuing from where you have stopped.

Note: During recordings, a red dot with the programme name is displayed on the upper part of the TV screen.

This information can be removed from the screen by pressing the “Blue” function key.

Recording

You can record the program you are watching or schedule a recording to a future program. While watching a

program - press the “Record” key on your remote control to record the program you are watching. Scheduling a

future recording can be done from either the Program Guide screen or from the Personal Planner screen.

Note: By pressing the “Record” key an endless recording is triggered, but if the Info-banner is displayed, a

recording will be started with start- and end time taken from Info banner.

Playback

Pressing the Library key on your remote control will bring up the Library screen in which all the recordings

available on your mass-storage device will be listed. You can then select a recoding le for playback. The Library

also lists JPEG and MP3 les so you can playback slide shows and play lists too.

During playback, the Stop, Pause/Play, Fast Forward, Fast

Backward, Slow motion and Next/Previous Chapter keys are used

to control and navigate through the different bookmarks of the

recordings.

Use the “Green” function key to set a bookmark in a recording you

are watching. Use the “Red” function key to delete a bookmark.

The “Yellow” function key will bring up the Go To dialog that allows

you to access the le by inputting the number of minutes from the

beginning of the recording.

Use the “Blue” function key to enter into Edit mode where you can

remove parts marked by bookmarks from the recordings.

Instant Replay

Pressing the Instant Replay key on your remote control will

playback the last 30 seconds of the recording you are watching or

the program you are watching in a Time Shift mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL5550S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inverto IDL5550S Manual

Product: