509835
18
Zoom out
Zoom in
Previous page
1/66
Next page
1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 18
Composite
C M Y CM MY CY CMY K
6.6.4.2 Advanced Search
In addition to the automatic search, a manual search procedure
is also available. In this case you must search specifically for the
program on a specific satellite transponder. Unlike the automatic
search procedure, here you must enter all reception parameters
explicitly.
The technical reception parameters that must be entered in this
display can be obtained either from satellite magazines, or from
the relevant program provider.
The following information must be input:
Satellite: First select the satellite position to be searched. Below this you will see a display of the current
signal strength.
Frequency: Here you must enter the five-digit transponder frequency, e.g. 11836 for 11.836GHz.
Polarity: Here you must enter the polarization plane of the transponder (“Horizontal” or “Vertical”).
Symbol rate: Either select one of the two usual rates commonly found on the Astra and Eutelsat satellites,
22.000 as well as 27.500 symbols/s, or enter a specific value manually. The receiver is equipped to process
symbol rates between 2.000 and 45.000 symbols/s.
Scan Filter: There are three choices:
FTA: Only search free-to-air programs.
FTA+Irdeto: Search free-to-air plus Irdeto scrambled programs
All: Search all kinds of programs, including other CA systems.
PID Video: Packet identifier for the video signal
PID Audio: Packet identifier for the audio signal
PID PCR: Program Clock Reference
Now press the red function key to initiate the manual program search. All program broadcasting within the
framework of specified parameters will be displayed, one after the other, on the following page. You can
then decide whether you want to store the newly found program in memory, or whether you wish to discard
them. The search procedure can be terminated at any time by pressing the “EXIT” key.
6.6.4.3 Preprogrammed List
The receiver automatically selects your country name. The sub-
display “ Do you want to reinitialise the program list? “, Please
pressing the “ OK” key, then will be initialising the program. Please
wait about 15 seconds.
6.6.5 Time / Date Settings
Time/Date settings: If the ”Automatic Time Update” is set to “On”,
the receive will receive the digital clock time and date as broadcast
by the digital TV programmed providers. The DVB standard will
broadcast this in GMT time zone. In order to display local time
correctly, It may be necessary to set a time offset, indicating the
difference between local time and GMT (e.g. in Germany daylight
savings time in summer is +2h, winter time is +1h)
Clock mode: The time can be displayed in 12 or 24-hour format.
Automatic Time Update: The receiver can either receive the
Current time via the digital TV programmers (On),
Or it can calculate current time independently (Off).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL-5000HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL-5000HD in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info