509835

Inverto IDL-5000HD Manual

16
Zoom out
Zoom in
Previous page
1/66
Next page
1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 16
Composite
C M Y CM MY CY CMY K
6.6.3 Outdoor Settings
The receiver must be fed with information as to how many
satellite positions can be received by the satellite antenna
(the number of LNBs), and which switching signals are available
to control the individual components of the installation, such as
the LNBs or the multi switches.
6.6.3.1 Satellite
Here you should select from a list of all European satellite
positions, the current position at which the LNB being
configured is the one currently showed (e.g. Astra1, Hotbird
or another satellite).
6.6.3.2 LNB Type
The default setting here is “Universal”. If you are using a different type of LNB, use left/right key to select
the appropriate type of LNB. You can choose here a motorized LNB, and this will give access to the Motor
Settings menu.
6.6.3.3 LOF Low
The receiver needs to know precisely the two local oscillator frequencies (LOF) in the LNB (Standard:
Universal LNB with 9,75/10,6 GHz). Depending on the type of LNB selected, LOW frequencies may already
be suggested at this stage. These can, however, be changed as requited. You can also enter any specific
value you require.
6.6.3.4 LOF High
The receiver needs to know precisely the two local oscillator frequencies (LOF) in the LNB (Standard:
Universal LNB with 9,75/10,6 GHz). Depending on the type of LNB selected, frequencies may already be
suggested at this stage. You can also enter any specific value you require.
6.6.3.5 Band Switching
Here you can specify whether the receiver is to switch between the low and high bands by means of
a 22KHz switching signal (Standard for Universal LNB: “Auto”), or whether the signal should be transmitted
continuously or not at all.
6.6.3.6 Primary DiSEqC
The receiver automatically selects your first choice as the Primary DiSEqC.
6.6.3.7 Secondary DiSEqC
If your first choice is not available, the second choice is automatically selected. If the second choice is
not available, the receiver will use the original DisEqC of the program.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL-5000HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL-5000HD in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info