799582

Instant Pot Lux series Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
19
Register your product today at www.instantpot.com/support/register
Problem Possible Reason Solution
Difficulty
closing lid
Sealing ring not
properly installed
Reposition sealing ring, ensure it is snug behind sealing ring
rack
Float valve in the
popped-up position Gently press the float valve downward with a long utensil
Contents in cooker
are still heated
Turn steam release handle towards “Venting” position,
then lower lid onto cooker base slowly, allowing heat to
dissipate
Difficulty
opening lid
Pressure inside the cooker
Release pressure according to recipe; only open lid after
float valve has dropped down
Contents may be under pressure; to avoid
scalding injury, do not attempt to force lid open.
Float valve stuck at the
popped-up position due
to food debris or residue
Ensure steam is completely released by quick releasing
pressure, then press float valve gently with a long utensil
Open lid cautiously and thoroughly clean float valve,
surrounding area, and lid before next use
Inner pot is stuck
to lid when cooker
is opened
Cooling of inner pot may create
suction, causing inner pot
to adhere to the lid
To release the vacuum, turn steam release handle
towards “Venting” position
Steam leaks
from side of lid
No sealing ring in lid Install sealing ring
Sealing ring damaged or not
properly installed Replace sealing ring
Food debris attached
to sealing ring Remove sealing ring and clean thoroughly
Lid not closed properly Open then close lid
Sealing ring rack is
warped or off-center
Remove sealing ring from lid, check sealing ring rack for
bends or warps; contact Customer Care
Inner pot rim may be misshapen Check for deformation and contact Customer Care
Float valve
does not rise
Food debris on float valve
or float valve silicone cap
Remove float valve from lid and clean thoroughly; perform
“Initial Test Run” to check for function;
contact Customer Care
Too little liquid in the inner pot Check for scorching on bottom of inner pot; add 1 1/2 cups
(12oz / 375mL) liquid to inner pot
Float valve silicone cap
damaged or missing Install or replace float valve
Float valve obstructed by
lid-locking mechanism
Tap float valve with a long utensil. If not resolved,
turn cooker off and remove small parts from lid; clean
thoroughly and perform “Initial Test Run” to check for
function;
contact Customer Care
No heat in the inner pot Perform “Initial Test Run” to check for function;
contact Customer Care
Inner pot base may be damaged Perform “Initial Test Run” to check for function;
contact Customer Care
Troubleshooting
WARNING
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Instant Pot Lux series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Instant Pot Lux series in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info