738436
14
Zoom out
Zoom in
Previous page
1/28
Next page
Page | 13
remedy for such a symptom is to isolate the unit from potential disturbances. Additionally, a person’s body chemistry or lack of perspiration
can prevent the chest strap from providing a strong or accurate heart rate signal.
A wireless telemetry heart rate receiving system is one feature found on this unit. For the console to detect and display your heart rate
wirelessly, five (5) conditions must be present:
1. A compatible Bluetooth BLE or ANT+ heart rate transmitter must be functioning and worn. For proper function, please refer to the
manufacturer’s instructions.
2. The unit must be powered on.
3. A workout program must be running.
4. The user is within three (3) feet of the console.
5. The heart rate transmitter must be connected to the console.
For strong transmission of the heart rate signal, lightly wet the chest strap electrodes (the two molded, rectangular surfaces on the backside
of the strap) and secure the strap as high under the chest muscles as possible. The strap should be snug, but comfortable enough to allow
for normal breathing. For detailed and model specific information, read and follow the heart rate manufacturer’s instructions.
The chest strap will deliver an optimum heart rate reading when the electrodes are in direct contact with bare skin or in some cases,
through wet, lightweight clothing. If necessary, moisten the chest strap electrodes by pulling the center of the chest strap away from the
chest to expose the two electrodes.
OPERATIONAL MODES
Ready Mode
The Ready Mode is designed to notify the user that the console is powered on and ready to begin a program.Inspire Fitness” will scroll
upward in the 13x94 Brickyard Display, while the QR code containing links to the Inspire Fitness Studio applications will post in the 25x25
Brickyard Display. The Ready Mode is ten (10) minutes in length. If no other activity occurs before the Ready Mode period has elapsed, the
console will enter the Sleep Mode.
Sleep Mode
After five (5) minutes of inactivity, the console will enter the power-saving Sleep Mode and display the Inspire logo. All display features will
switch off. Any previously-entered user data will be saved. To launch the Ready Mode, rotate the handlebars or press any button on the
console.
Change Units Mode
During Ready Mode and any Program Run Mode, pressing the CHANGE UNITS key will toggle the displayed values between the Metric-
Meters Unit Setting, Metric-KMs Units Setting and Standard-Miles Units Setting.
Metric-Meters The Metric-Meters Unit Setting will post the distance value in meters and pace value in Mins/KM.
Metric-KMs The Metric-KMS Unit Setting will post the distance value in kilometers and the pace value in Mins/KM.
Standard-Miles The Standard-Miles Unit Setting will post the distance value in miles and the pace value in Mins/Mile.
Sound On/Off Change Mode
The SPEAKER ON Icon or SPEAKER OFF Icon will always be lit depending upon the user’s current selection. To toggle
between the Speaker On setting and the Speaker Off setting, press the SOUND ON/OFF key.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire CR2.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire CR2.5 in the language / languages: English as an attachment in your email.

The manual is 6,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info