688780

Innova 2.0 Manual

7
Zoom out
Zoom in
Previous page
1/28
Next page
7
S
I
U
EN
USER MANUAL
Key/Display
Operation
Fan speed control (models 8 and 10)
By pressing this button several times, the speed will change according to the following sequence: Minimum, Medium,
Maximum and Automatic
The higher the speed is set, the better the appliance will perform, but it will be less quiet. By selecting Automatic mode
(shown by three speed bars moving up and down on the display), the on-board microprocessor automatically adjusts
the speed, so that it stays higher the greater the difference between the temperature detected and the temperature
set. The speed will always be automatically decreased as the room temperature approaches the set temperature.
This is not possible in humidification only or nocturnal well-being mode where the appliance can only operate at a low
speed.
Setting power for models inverter 10HP and 12HP
By pressing this key sequentially, it is possible to set the power supplied by the appliance on 5 adjustments: Minimum,
Medium, Maximum, Dual Power and Automatic.
The higher the power is set, the better the appliance will perform, but it will be less quiet.
The Dual Power function (shown by three flashing speed bars on the display and the seven red or blue bars moving
up and down of the digital thermometer), available only in heating and cooling mode, supplies a 30-minute Overboost.
Then, the controller inhibits the function and switches to automatic mode.
By selecting Automatic mode (shown by three speed bars moving up and down on the display), the on-board
microprocessor automatically adjusts the speed, so that it stays higher the greater the difference between the temperature
detected and the temperature set. This is not possible in humidification only or nocturnal well-being mode where the
appliance can only operate at a low speed.
Setting the Timer function
• The appliance allows the user to program when to turn it on and off, as required.
• While the conditioner is running, it is possible to schedule when it turns off by pressing the Timer button, followed
by the number of hours (from 1 to 24), after which the unit will be put in stand-by.
• When the air conditioning unit is off, it is possible to schedule when it turns on by pressing the Timer button,
followed by the number of hours (from 1 to 24) after which the unit will start.
• Then, press the confirm button.
Touch-screen display key lock
• The key lock is activated by keeping the Timer symbol on the touch-screen display pressed for three seconds.
The user cannot perform any actions. The stand-by symbol flashes every second.
• To deactivate the lock, keep the Timer symbol on the touch screen pressed for three seconds once again.
The lock remains active in the case of a power failure and also if the remote control is used!
… 7 …


Need help? Post your question in this forum.

Forumrules
1

Forum

innova-2.0

Reset search

  • i need a simple instruction on hoe to operate the remote control for the innova2.0vertical 10-12DC Inverter A/C unit this is for a nursing home where the residents need the simple example please help i checked the operators manual and its to much for them to comprehend thanks Submitted on 15-7-2022 at 15:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innova 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innova 2.0 in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Innova 2.0

Innova 2.0 Installation Guide - English - 20 pages

Innova 2.0 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info