688780

Innova 2.0 Manual

6
Zoom out
Zoom in
Previous page
1/28
Next page
6
S
I
U
USER MANUAL
Key/Display
Operation
Switching the appliance on and off
It is possible to switch the appliance on or off (stand-by) by pressing the specific button. The control system of the
appliance is equipped with a memory, so settings will not be lost if the appliance is switched off or in the power supply
is cut. This key is used to activate or deactivate the appliance for short periods of time.
In case of long periods of inactivity, the appliance must be deactivated by disconnecting either the main switch or
the plug from the socket.
Well-being button (economic automatic mode)
By choosing this mode on the appliance, it sets the best level of comfort in the room. The conditioner selects the mode
automatically (cooling or heating) according to the temperature set and ventilation speed according to the temperature
of the room.
Cooling only mode
• In this mode, the appliance dehumidifies and cools the room.
• It is possible to set the desired temperature between 16 and 31°C and, if this temperature is lower than the room
temperature, the compressor starts up after three minutes (maximum) and the appliance starts dispensing cool
air, maintaining ventilation active even if the setpoint has been reached.
Dehumidification only mode
In this mode, the appliance dehumidifies the room. Selecting this mode is useful during mid-seasons, i.e. on days
(e.g. rainy ones) when the temperature is pleasant, but excess humidity causes discomfort. This mode ignores both
room temperature and ventilation speed settings. The latter is always set to a minimum. It is normal for the appliance
to work intermittently.
Ventilation only mode
By selecting this function, the compressor is never activated and the appliance does not affect either room temperature
or humidity. IT IS possible to choose the speed of the fan
Heating only mode
• In this mode, the appliance heats the room.
Set on heating only mode, the appliance periodically defrosts the evaporator coil, if necessary. During this phase,
the conditioner does not dispense warm air, even if its internal components are on, except for the room fan.
• It is possible to set the desired temperature between 16 and 31°C and, if such temperature is higher than the
room temperature, the compressor starts up after three minutes (maximum) and the appliance starts dispensing
warm air.
Nocturnal well-being button
While the appliance is on in the selected cooling or heating mode, it is possible to choose different functions by
pressing the button in order to maximise noise reduction, energy saving and nocturnal well-being regulation.
In this mode, ventilation is set on minimum speed.
This mode should be activated right before going to sleep.
• In cooling mode, the set temperature is increased by 1°C after one hour and by another degree after two. After
the second hour, the temperature is no longer changed and, after six hours, the appliance is put in stand-by.
• In heating mode, the set temperature is lowered by 1°C after one hour and by another degree after two. After the
second hour, the temperature is no longer changed and, after six hours, the appliance is put in stand-by.
This function is not available for dehumidification only, ventilation only and economic automatic modes and can be
excluded any time (ideally once awake) by pressing the button again.
If the Timer has also been set, the appliance will turn off at the set time.
Control of air flow direction
By pressing the specific button, it is possible to either select the continuous oscillation of the mobile air outlet flap - in
such case, the symbol on the display is lit - or to block it in any position.
IMPORTANT: The mobile flap must never be moved manually. In cooling and dehumidification modes, the position
of the flap is reset every 30 minutes to prevent dew from forming.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

innova-2.0

Reset search

  • i need a simple instruction on hoe to operate the remote control for the innova2.0vertical 10-12DC Inverter A/C unit this is for a nursing home where the residents need the simple example please help i checked the operators manual and its to much for them to comprehend thanks Submitted on 15-7-2022 at 15:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innova 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innova 2.0 in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Innova 2.0

Innova 2.0 Installation Guide - English - 20 pages

Innova 2.0 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info