800597
40
Zoom out
Zoom in
Previous page
1/44
Next page
40
5. 4 AUTOMATIC DEFROST
If the surrounding temperature is low during operation, frost may form in the air conditioner. The device will
automatically start defrosting and the POWER indicator will flash on the display. The defrost control phases are
as follows:
A. While the device works in COOL or DRY mode, the surrounding temperature sensor is able to detect if the
temperature of the device tube is below 1 ° C or if the refrigerant temperature reaches 7 ° C. Following one of
these two conditions, the compressor will stop for 10 minutes, and then restart in COOL mode.
B. While the device is working in DRY mode and once the tube temperature sensor detects that the device
temperature is below 40 ° C and the difference between the tube and room temperature is below 19 ° C, after
20 minutes of air conditioner operation, defrosting will start for 5 minutes and the power indicator will flash.
5.5 OVERLOAD PROTECTION
In the event of a power failure, the machine will be stopped for 3 minutes before restarting to protect it.
6. DRAINAGE
Manual drainage
1) When the machine stops after the water tank is filled, disconnect the power plug.
Note: Si prega di spostare la macchina con cautela, in modo da non versare l’acqua nella vaschetta nella parte
inferiore del dispositivo.
2) Place a container under the water outlet at the rear of the product.
3) Remove the cap, the water will automatically flow into the water container.
Note:
1. Keep the cap.
2. During drainage, the conditioner may be tilted slightly backwards.
3. If the water container cannot hold all the water, before it becomes full, quickly close the water outlet with the
cap to prevent the water from flowing onto the floor or carpet.
4. When the water is completely drained, close the water outlet.
Notes: 1. Restart the machine after closing the water outlet with the cap and replacing the lid, otherwise the
machine’s condensation water will flow onto the floor or carpet.
Continuous drainage
IThe self-evaporating system uses the collected water to cool the internal parts of
the air conditioner for maximum performance. It is not necessary to empty the
drain tank during COOL mode, except during DRY mode and in conditions of high
humidity. The condensed water evaporates and is expelled through the drain hose.
For continuous or unattended operation during the DRY function, connect the
supplied drain hose. The condensed water can be automatically discharged into
a bucket.
- Turn off the machine before proceeding.
- Remove the water outlet cap and keep it.
- Connect the drain hose correctly and securely and make sure it is free of
obstructions and not kinked.
GB
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-521 in the language / languages: English, Italian as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info