589983
7
Zoom out
Zoom in
Previous page
1/20
Next page
Ł
5
After lid is in place, the pot is ready to be heated. There are 2 levels of pressure to
choose from. See chart left.
Ł Choose your level of pressure and heat pressure cooker on high. Steam may escape
from steam outlet. When using a gas stove, make sure the flame does not go beyond
the edge of the pot base.
Ł The pressure cooking process begins automatically when the temperature rises.
The pressure indicator (Red) rises, indicating the internal pressure is building up.
Ł When steam escapes steadily from the pressure regulator, reduce the heat and set
your cooking time by your recipe or according to your own preferences.
Ł Turn off the burner when cooking time is reached. Use extreme caution when
handling, as the cooker and content are extremely hot. When cooking is complete,
remove the pressure cooker from the heat. You must not remove the lid until the
internal pressure is reduced.
Ł Remove the pot from stove and allow the pressure cooker to cool down naturally.
Never attempt to force open the pressure cooker If the cooker lid is not able to slide
easily then leave the pressure cooker to cool a little longer
When the pressure indicator is down in the normal position gently shake the cooker
and turn the valve to the steam release position to release any remaining steam After
all the steam is released the lid can be opened
Estimate cooking times on the low side because foods cook so rapidly in the pressure
cooker a few extra minutes and they can turn to mush If in doubt release the pressure
open the pot and verify If it is under cooked you can always continue cooking
Allow the pressure cooker to cool before cleaning
CLEANING
Use a smooth sponge and soap rinse wash and dry the pressure cooker
We recommend washing all pressure cooker parts by hand with plenty of water and soap
Before washing the lid and its parts take o the pressure control valve and remove
any food or debris that is still there This can be verified by holding the lid up to the
light and looking through the vent pipe and ensuring the light is visible
Remove the rubber gasket and clean with hot water after each use Dry completely
and place around the inner side of the cover It is time for a new gasket when there is
leakage between the lid and pot The leakage is caused by the shrinkage of the silicone
gasket For best results using your pressure cooker replace the gasket every 
months depending on usageYou can purchase an IMUSA rubber gasket at national
retail stores authorized retail outlets and amazoncom
Store the pressure cooker in a dry place with the lid upside down This will prevent
unpleasant odors from forming If moisture is present it can create a seal that makes
the cooker dicult to open
Use IMUSA replacement parts The use of other brand parts may cause damage to
the pressure cooker resulting the loss of IMUSA’s limited lifetime warranty
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IMUSA Stainless Steel Dial Pressure Cooker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IMUSA Stainless Steel Dial Pressure Cooker in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info