670434
57
Zoom out
Zoom in
Previous page
1/96
Next page
9-4
Programmed scan and Fine Programmed scan
Programmed scan and Fine Programmed scan
Repeatedly scans between two Scan Edge
frequencies (
P00A/P00B ~ P49A/P49B).
L To change the Scan Edge Memory channels, see
“Writing a memory channel” for details. (p. 8-2)
L If the both Scan Edges are the same frequencies,
the Programmed scan does not start.
L In the Fine Programmed scan, the scan speed
decreases when the squelch opens, but the
receiver keeps scanning. The scan tuning step
changes to 10 Hz when the squelch opens.
D Programmed scan operation
1. Open the SCAN screen.
MENU
» SCAN
2. Touch [TYPE/SET].
3. Touch [PROG].
4. Touch [SELECT] to select the item* to change,
* Scan edge channel number (Example: P00A/P00B),
scan edges (lower and upper frequencies), receive
mode,lterandtuningstep(TS).
5. Rotate , or to touch [EDIT] to change
the setting.
L The changed settings are stored in the Program Scan
Edge channel.
6.
Touch [SELECT] several times to exit the edit mode,
then touch [START] or hold down for 1 second.
• The Programmed scan starts.
LTouch [STOP] or push
to cancel the scan.
7. To close the SCAN screen, push
EXIT
.
D Fine Programmed scan operation
1. Start a Programmed scan.
L See steps 1 ~ 6 in “Programmed scan operation” to
the left for details.
2. While Programmed scanning, touch [FINE].
L Each touch toggles the Programmed scan and the
Fine Programmed scan.
LTo cancel the scan, touch [STOP] or push
.
3. To close the SCAN screen, push
.
Blinks
Recalls the VFO
frequency before
the scan starts
Jumps to the lower edge
While Programmed scanning
While Fine Programmed scanning
Blinks
Blinks
9
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
P00A
144 MHz
P00B
148 MHz
(Example) P00A/00B
Scan
Jump
Lower
edge
Upper
edge
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info