670434
59
Zoom out
Zoom in
Previous page
1/96
Next page
9-6
Auto Memory Write scan
D Auto Memory Write scan operation
1. Open the SCAN screen.
MENU
» SCAN
2. Touch [TYPE/SET].
3. Touch [AUTO].
4. Touch [SELECT] to select the item*, then rotate
to change the settings.
* Program Scan Edge number (Example: P00A/P00B),
scan edges (lower and upper frequencies), receive
mode,lterandtuningstep(TS).
L The changed settings are stored in the Program Scan
Edge channel.
Auto Memory Write scan
When a signal is received during a Programmed scan, the
frequency is automatically stored into an Auto Memory
Write channel group (A000 ~ A199).
L When no blank channels is left in group A (A000 ~ A199),
the Auto Memory Write scan automatically cancels.
You can clear the all channels in group A (A000 ~ A199)
every time you start a Auto Memory Write scan.
See page 9-3 for details.
L The channels in group A (A000 ~ A199) are automatically
aligned at the top, and all the blank channels are
removed (A000 ~ A199).
5. Touch [SELECT] several times to exit the edit
mode, then touch [START].
Theconrmationdialogisdisplayed.
6. Touch [YES].
• The Auto Memory Write scan starts.
L If you do not want to clear the memory channels in
the group A (A000 ~ A199), touch [NO].
LTo cancel the scan, touch [STOP] or push
.
7. To close the SCAN screen, push
EXIT
.
A000
A002
A001
A199
85.100
80.200
76.500
– – –
– – –
Blinks
Recalls the VFO
frequency before
the scan starts
Jumps to the lower edge
SCAN screen
9
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Scanning
Scan range
Jump
Signal
received
Signal
received
Auto MW CH group
Channel Frequency
Signal
received
The received signal frequency is stored
into an Automatic Memory Write group
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info