670434

Icom IC-R8600 Manual

55
Zoom out
Zoom in
Previous page
1/96
Next page
9-2
Priority scan
A priority scan periodically checks a selected memory
channel* while receiving on a VFO frequency.
* Memory channel, Auto Memory Write channel, Scan Skip
Channel or Program Scan Edge Channel.
D Priority scan operation
1. Open the SCAN screen.
MENU
» SCAN
2. Touch [TYPE/SET].
3. Touch [PRIO].
4. Touch [SELECT] to select the item to change.
• No.: Priority memory preset number (0 ~ 9)
(You can save up to 10 pairs of Group and Ch.)
• Group: Memory Group number
• Ch: Memory channel number.
5. Rotate to change the setting.
LYou cannot select blank channels.
6. Touch [SELECT] several times to exit the edit
mode, then touch [START] or push .
• A Priority scan starts.
• To cancel the scan, push
or touch [STOP].
7. To close the SCAN screen, push .
D Monitoring the Priority channel
z During a Priority scan, hold down for
1 second to monitor the priority channel.
• "PRIO" is displayed while monitoring.
• Push
to cancel the monitoring.
Setting the Scan Resume function
D Setting the Scan Resume function
You can set the Scan Resume options for when the
signal disappears.
1. Hold down for 1 second.
• The SCAN DELAY screen opens.
2. Touch the resume condition option.
• [OFF]: The scan pauses until the signal
disappears.
• [DELAY]: When a signal is received, the
scan pauses for the preset delay
period, then resumes.
(Set the delay by rotating .)
• [∞](Innity): Thescaniscancelledwhena
signal is received.
D Setting the scan delay timer
You can set the delay time that the scan restarts after
the signal disappears.
z Rotate .
• Setting range: 1 ~ 30 seconds
LThe delay amount is displayed while setting.
L If a signal is received before the delay time has
expired, the timer restarts.
L When the Scan Resume function is set to [OFF] or [∞],
the scan delay is not activated.
90.6 MHz (VFO)
Blinks
SCAN screen
Setting the priority interval
Priority scan checks the priority channel according to
the set interval.
1. Push .
• The setting menu opens.
2. Touch [PRIO INTVL].
3. Rotate .
• Setting range: 1 ~ 15 seconds
9
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
(Example)
145 MHz (Memory channel)
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info