670434
54
Zoom out
Zoom in
Previous page
1/96
Next page
9-1
Scan types
Basic scanning
SCAN TYPE SCANNING DETAILS
VFO SCAN
PROGRAMMED SCAN
Repeatedly scans between 2 Scan Edge frequencies of Program Scan Edge memory
channels. The scan starts from the lower edge frequency. (p.9-4)
FINE PROGRAMMED
SCAN
During a Programed scan, the scan speed decreases when the squelch opens, but the
receiver keeps scanning. The scan tuning step changes to 10 Hz when the squelch opens.
F SCAN
Repeatedly scans within the F span area. The scan starts from the center frequency, then
upper edge and lower edge. (p.9-5)
FINE F SCAN
During a F scan, the scan speed decreases when the squelch opens, but the receiver
keeps scanning. The scan tuning step changes to 10 Hz when the squelch opens.
AUTO MEMORY WRITE
SCAN
During a Programed scan, and when a signal is received, the frequency is automatically
stored into an Auto Memory Write channel group. (p.9-6)
MEMORY SCAN
MEMORY SCAN
Repeatedly scans memory channels, including Skip and Auto Write memory channels.
You can select the group and the scan edge channel.
(p.9-7)
SELECT MEMORY SCAN
Repeatedly scans all or one of 9 Select Memory channels. (p.9-7)
MODE SELECT MEMORY
SCAN
Repeatedly scans the memory channels with the selected receive mode (ignoring other
receive modes). (p.9-9)
PRIORITY SCAN
Periodically monitors a selected memory channel while receiving a signal on VFO. (p.9-2)
Adjusting the scan speed
Adjust the scan speed for slower or faster scans.
1. Push .
• The setting menu opens.
2. Touch [SCAN SPEED].
3. Rotate .
• Setting range: 1 (slow) ~ 30 (fast)
L You cannot change the scan speed during a Fine
Program scan or Fine ∂F scan.
Push to start or stop a scan, then touch the
desired scan type.
L
See the following pages for the Scan setting details. (p. 9-3)
D VFO scan and Memory scan
1. Push .
If you started a scan of the same scan type before, hold
down
for a second, to start the same scan.
2. Touch the desired scan type.
• The SCAN screen opens, and the scan starts.
L
Rotating changes the scan direction:
Rotate right for the up scan, rotate left for the down scan.
L To cancel the scan, push .
L You can hide the SCAN screen during a scan. Set
[Display SCAN Screen (at SCAN START)] item to
"OFF" on the SCAN SETTING screen. (p. 9-3)
SCAN START screen
D Priority scan
Follow the procedure below to start or stop a Priority scan..
LSee page 9-2 for setting priority channel.
1. Push .
"PRIO" is displayed.
L Hold down
for 1 second to monitor the priority
channel.
2. Push again to cancel the scan.
9
SCANS
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info