12736
25
Zoom out
Zoom in
Previous page
1/64
Next page
21
6
SCAN OPERATION
Selecting scan edges
The scanning range can be set to all frequencies (full scan), a
selected band (band scan) or between two user-programmed
frequencies (programmed scan).
The programmed scan edges can be programmed in the
same manner as programming regular memory channels.
Program the desired scan edge frequencies in a pair of
programmed scan edge channels in advance. (pgs. 14, 15)
q Select VFO mode with [V/M].
w Push and hold [], then rotate [DIAL] to select desired
scan edge.
•“ALL for full scan, BAND for band scan or PROG(RAM) 0”–
PROG(RAM)24 for programmed scan.
e Release [] to start the programmed scan using the se-
lected edges.
When scanning across the band as follows (programmed
scan edges are set across the band), the parameters like
tuning step, receive mode, offset frequency, duplex direc-
tion, etc. are used in each bandsVFO settings instead of
these scan edges.
Band ranges
FREQUENCY RANGE
BAND
Broadcast band
HF band
50 MHz band
FM broadcast band
VHF avionics band
144 MHz band
300 MHz band
400 MHz band
800 MHz band
1200 MHz band
2400 MHz band
0.495 1.620 MHz
1.625 29.995 MHz
30.0 75.995 MHz
76.0 107.995 MHz
108.0 135.995 MHz
136.0 255.095 MHz
255.1 382.095 MHz
382.1 769.795 MHz
769.8 960.095 MHz
960.1 1399.995 MHz
1400.0 2450.095 MHz
S1 3 5 7 9
VOL
FM
146.100.000
TS
15.0
ALL
S1 3 5 7 9
VOL
FM
146.100.000
TS
15.0
PROGRAM24
S1 3 5 7 9
VOL
FM
146.100.000
TS
15.0
BAND
Full scan Band scan Programmed scan 24
(Scan edge channels
24A and 24b)
! IC-R3_4.qxd 03.5.2 2:51 PM Page 21 (1,1)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info