12736
27
Zoom out
Zoom in
Previous page
1/64
Next page
23
6
SCAN OPERATION
e Push [] or rotate the tuning dial while pushing [FUNC] to
select the desired scan pause time.
•“2SEC”–“20SEC : scan pauses for 220 sec. on a received sig-
nal.
•“HOLD : scan pauses on a received signal until it dis-
appears.
r Push [(MODE)SET] to exit set mode.
DD
Setting the scan resume time
The scan restarts after a signal disappears according to the
resume time. It can be set from 05 sec. or unlimited.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until Scan Resume or RESUmE appears.
•“RESUmE disappears after 1 sec. and the previously selected
scan resume time and RE appears when color LCD is OFF.
e Push [] or rotate the tuning dial while pushing [FUNC] to
select the desired scan resume time.
•“1SEC”–“5SEC : scan restarts 15 sec. after the signal disap-
pears.
•“0SEC : scan restarts immediately after the signal dis-
appears.
•“HOLD : scan restarts by rotating [DIAL] only.
r Push [(MODE)SET] to exit set mode.
2 sec. resume timeScan resume time
set mode
Scan resumes by
rotating [DIAL] only.
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : HOLD
10 sec. pause timeScan pause time set
mode
Pause scan
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : HOLD
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
! IC-R3_4.qxd 03.5.2 2:51 PM Page 23 (1,1)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info