12736
23
Zoom out
Zoom in
Previous page
1/64
Next page
19
6
SCAN OPERATION
Full/band/programmed scan
Scanning searches for signals automatically and makes it
easier to locate new stations for listening purposes, etc.
q Select VFO mode with [V/M].
w Make sure the squelch is set to the threshold point.
Select automatic squelch (AUTO) or a level (19) where the
noise is just muted. (p. 10)
e Push and hold [], then rotate [DIAL] to select desired
scan edge.
•“ALL for full scan, BAND for band scan or PROG(RAM) 0”–
PROG(RAM)24 for programmed scan. (see the next page)
r Release [] to start the scan.
Decimal point(s) ashes while scanning.
•“PSKIP appears when the frequency skip function is turned ON.
(p. 19)
•“0P”–“24P flash to indicate which pair of scan edges is being
scanned.
To change the scanning direction, rotate [DIAL].
If the pocket beep function is activated, the receiver automati-
cally selects the tone squelch function when a scan starts.
t To stop the scan, push [] again.
If the same frequencies are programmed into a pair of
scan edges, programmed scan does not start.
For programmed scan, scan edges must be programmed
in advance. Program scan edges in the same manner of
programming a memory channel (p. 14) and select a scan
edge. (p. 21)
A tone scan function is available to search for subaudible
tones (e.g. when you want to find a subaudible tone fre-
quency necessary to open a repeater or to open the tone
squelch). See p. 30 for details.
S1 3 5 7 9
VOL
FM PSKIP
146.100.000
TS 15.0
PROGRAM 0
S1 3 5 7 9
VOL
FM PSKIP
146.100.000
TS 15.0
BAND
S1 3 5 7 9
VOL
FM PSKIP
146.100.000
TS 15.0
ALL
Band scanProgrammed scan 0 Full scan
! IC-R3_4.qxd 03.5.2 2:50 PM Page 19 (1,1)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info