12680
53
Zoom out
Zoom in
Previous page
1/78
Next page
45
10
DSC MENU OPERATION
10
Frequency input
A total of 50 frequency pairs can be programmed as
Call frequency, Traffic frequency or Scan fre-
quency. The frequency usage and frequency name
are also programmed together with the frequency.
DD
SETTING PROCEDURES:
NOTE: Up to 6 pairs of frequencies only can be as-
signed as a scan frequency. They are scanned dur-
ing DSC watch mode only. (Different from the dis-
tress/safety frequencies.)
q During DSC menu indication, rotate [CH] to select
Set up then push [ENT] to select setup menu.
The select screen is displayed.
w Rotate [CH] to select the Call frequency
Traffic frequency or Scan
frequency, then push [ENT].
The call/trafc/scan frequency list screen is displayed.
When the memory is full:
Memory full is displayed beside <add>
indication when a total of 50 pairs of frequencies
(6 pairs for scan frequency) have been pro-
grammed.
Delete any unnecessary frequency in such cases
(see p. 46 for delete).
e Rotate [CH] to select <add> then push [ENT].
The call/traffic/scan frequency setup screen is dis-
played.
r Push the numeral keys to input the desired 10-
character frequency name, and both transmit and
receive frequencies, then push [ENT].
Rotate [CH] to move the cursor.
The frequencies entered should be within the marine
frequency ranges as follows.
1.6 2.9999 MHz 4.0 4.9999 MHz
6.0 6.9999 MHz 8.0 8.9999 MHz
12.013.9999 MHz 16.017.9999 MHz
18.019.9999 MHz 22.022.9999 MHz
25.027.5000 MHz
t Push [ENT] to program the contents into a all, traf-
c or scan frequency.
Returns to the call/trafc/scan frequency list screen.
The programmed frequency is displayed at the bottom
line, so [CH] rotation is necessary for the programmed
frequency conrmation.
y Push [MODE
SET
] to return to DSC watch mode,
or push [FREQ/CH] to return to the select screen.
********
Set
up
********
********
Set
up
********
--
Traffic
frequency
---
----
Call
frequency
----
********
Set
up
********
----
Scan
frequency
----
<add>
T:
4567.0kHz
ICOM
Group
R:
4567.0kHz
SEL
OK
Ç
Cancel
********
Set
up
********
********
Set
up
********
--
Traffic
frequency
---
----
Call
frequency
----
********
Set
up
********
----
Scan
frequency
----
SEL
OK
Cancel
Comment:ICOM_Group
TX:_4567.0kHz
RX:_4567.0kHz
********
Set
up
********
********
Set
up
********
--
Traffic
frequency
---
----
Call
frequency
----
********
Set
up
********
----
Scan
frequency
----
SEL OK
Cancel
Comment:
_________
TX:_____._kHz
RX:_____._kHz
********
Set
up
********
********
Set
up
********
--
Traffic
frequency
---
----
Call
frequency
----
********
Set
up
********
----
Scan
frequency
----
<add>
SEL
OK
Ç
Cancel
IC-M802_USA.qxd 02.7.9 10:58 Page 45
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info