12680
52
Zoom out
Zoom in
Previous page
1/78
Next page
10
44
DSC MENU OPERATION
2001 NEW
General
Up to 100 ID codes with frequency and name can be
programmed in MENU mode for easy recall during
DSC call setting.
In addition, the following settings/operation are avail-
able in DSC setup menu.
Manual position/time setting (p. 16)
Self-ID (MMSI code) indication (described in this sec-
tion)
ID input
A total of 100 ID codes can be programmed as Ad-
dress ID (for ships and coast stations) and Group ID
(for group stations). A pair of frequencies (both transmit
and receive) and ID name are also programmed to-
gether with the ID code which are used as call fre-
quencies when using the ID code.
DD
SETTING PROCEDURES:
q During DSC menu indication, rotate [CH] to select
Set up then push [ENT] to select setup menu.
The select screen is displayed as below.
w Rotate [CH] to select the Address ID or
Group ID, then push [ENT].
The address/group ID list screen is displayed.
When the memory is full:
Memory full is displayed beside <add>
indication when 100 ID codes have been pro-
grammed.
Delete any unnecessary IDs in such cases (see p.
46 for delete).
e Rotate [CH] to select <add> then push [ENT].
The address/group ID setup screen is displayed.
r Push the numeral keys to input the desired 10-digit
ID name, 9-digit code and both transmit and re-
ceive frequencies, then push [ENT].
Rotate [CH] to move the cursor.
When entering group code, enter 0 (zero) for the rst
digit.
The frequencies entered should be within the marine
frequency ranges as follows.
1.6 2.9999 MHz 4.0 4.9999 MHz
6.0 6.9999 MHz 8.0 8.9999 MHz
12.013.9999 MHz 16.017.9999 MHz
18.019.9999 MHz 22.022.9999 MHz
25.027.5000 MHz
t Push [ENT] to program the contents into the ad-
dress or group ID.
Returns to the address/group ID list screen automati-
cally.
The ID list is displayed in alphabetical order for ID
name, so [CH] rotation may be necessary for the pro-
grammed ID conrmation.
y Push [MODE
SET
] to return to DSC watch mode,
or push [FREQ/CH] to return to the select screen.
********
Set
up
********
------
Address
ID
------
********
Set
up
********
-------
Group
ID
-------
<add>
ICOM
M802
012345678
SEL
OK
Ç
Cancel
********
Set
up
********
------
Address
ID
------
********
Set
up
********
-------
Group
ID
-------
Name:ICOM_M802_
ID:012345678
TX:_2345.0kHz
RX:_2345.0kHz
SEL
OK
Cancel
********
Set
up
********
------
Address
ID
------
********
Set
up
********
-------
Group
ID
-------
Name:
_________
ID:0________
TX:_____._kHz
RX:_____._kHz
SEL
OK
Cancel
********
Set
up
********
------
Address
ID
------
********
Set
up
********
-------
Group
ID
-------
<add>
SEL
OK
Ç
Cancel
********
Set
up
********
--------
Select
--------
Address
ID
Group
ID
Call
frqeuency
Traffic
frqeuency
Scan
frqeuency
MMSI
check
SEL
OK
Ç
IC-M802_USA.qxd 02.7.9 10:58 Page 44
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info