12680
51
Zoom out
Zoom in
Previous page
1/78
Next page
9
43
MEMORY OPERATION
2001 NEW
9
8
Memory description
The IC-M802 has several kinds of memories as fol-
lows:
Address and group ID code memories (p. 44)
Call, trafc and scan frequency memories. (p. 45)
DSC transmission memory (described in this section)
Received message memory (p. 38)
Memory writing
10 DSC transmission memory channels allow you to
set often used format speciers and contents such as
for routine calls, group calls, etc.
q During DSC watch mode, select the desired format
category (except distress and test), and set the
message, trafc and call frequencies until the call
stand-by screen is displayed as described in the
CALL PROCEDURE section (pgs. 2335).
w Push and hold [ENT] for 1 sec. to select the TX
memory write condition.
e Rotate [CH] to select the desired memory channel.
r Push and hold [ENT] for 1 sec. again to store the
condition into the selected memory channel.
The set DSC format and calling station ID/name ap-
pear.
t Push [ENT] to return to the calling stand-by condi-
tion, or push [MODE
SET
] to return to DSC watch
mode.
---
TX
memory
write
----
0:Individual
987654321
1:
2:
3:
4:
5:
Ç
OKSEL
---
TX
memory
write
----
0:
1:
2:
3:
4:
5:
Ç
WriteSEL
Memory reading/transmitting/deleting
q Push [DSC] to select DSC watch mode, if neces-
sary.
w Push [TX
TXF
] to enter the DSC transmit memory
screen.
Or, push [MODE
SET
], rotate [CH] to select TX
memory then push [ENT], also selects the transmit
memory screen.
e Rotate [CH] to select the selected memory chan-
nel to be read.
r Push [ENT] to display the memory contents.
t Operate as follows:
When reading the memory contents only;
Push [MODE
SET
] to return to DSC watch
mode.
When transmitting the memory contents;
Push and hold [CANCEL/CALL] for 1 sec.
When clearing the memory contents;
Push and hold [CE] for 1 sec.
******
TX
memory
*******
------
Individual
------
Category:Distress
To:987654321
Traffic:J3E
TX
2134.0kHz
RX
2134.0kHz
Call
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
Call
******
TX
memory
*******
--------
Select
--------
0:Individual
987654321
1:
2:
3:
4:
5:
Ç
OKSEL
IC-M802_USA.qxd 02.7.9 10:58 Page 43
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info