12680
42
Zoom out
Zoom in
Previous page
1/78
Next page
34
7
CALL PROCEDURE
2001 NEW 2001 NEW
Group call
When you use DSC for calling the desired ships
group, use Group menu.
q Push [MODE
SET
] to select the DSC menu.
w Rotate [CH] to select Group then push [ENT].
e Select the desired 9-digit group code, then push
[ENT].
Use [CH] to select the group code when the desired
group is pre-programmed.
When Manual set is selected, enter the desired
code (last 8 digits only) via the keypad.
- The rst digit 0 (zero) is xed for group code.
r Rotate [CH] to select the desired pre-programmed
traffic frequency, or Manual set then push
[ENT].
When the pre-programmed traffic frequency is
selected, go to step y.
t Enter the desired transmit and receive traffic fre-
quency via the keypad, then push [ENT].
One of the voice channel, such as Tx/Rx: 2082.5 kHz,
4146.0 kHz, should be used.
y Rotate [CH] to select the desired pre-programmed
calling frequency, or Manual set then push
[ENT].
When the pre-programmed call frequency is se-
lected, go to step i.
u Enter the desired transmit and receive call fre-
quency via the keypad, then push [ENT].
i The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CANCEL/CALL] for 1 sec. to transmit the
group call.
Push and hold [ENT] for 1 sec. to store the calling con-
dition into TX memory described in pages 23 and 43, if
desired.
o After sending the call, the traffic frequency is se-
lected automatically.
!0 Announce the following message to stations.
- The group name.
- This is ..... (your ship name).
- The 9-digit identity OR call sign (or other identi-
cation of the ship).
RX
J3E
GPS
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
*********
Group
********
---------
Call
---------
To:087654321
Traffic:J3E
TX
2134.0kHz
RX
2134.0kHz
Call
Freq:TX
2177.0kHz
RX
2177.0kHz
Write-Menu
Call
*********
Group
********
----
Call
frequency
----
TX:_2345.0kHz
RX:_2345.0kHz
OKSEL
*********
Group
********
----
Call
frequency
----
Manual
set
T:
2345.0kHz
IC-M802-1
R:
2345.0kHz
T:
2177.0kHz
SHIP
R:
2177.0kHz
Ç
OKSEL
*********
Group
********
--
Traffic
frequency
---
TX:_2134.0kHz
RX:_2134.0kHz
OKSEL
*********
Group
********
--
Traffic
frequency
---
Manual
set
T:
4567.0kHz
IC-M802-1
R:
4567.0kHz
T:12345.0kHz
IC-M802-2
R:12345.0kHz
Ç
OKSEL
*********
Group
********
-------
Group
ID
-------
087654321
OK
*********
Group
********
-------
Group
ID
-------
Manual
set
Group-1
023456789
Group-2
023456788
Group-3
023456787
Group-4
023456786
Group-5
023456785
Ç
OKSEL
IC-M802_USA.qxd 02.7.9 10:58 Page 34
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info