12680
41
Zoom out
Zoom in
Previous page
1/78
Next page
33
7
CALL PROCEDURE
7
2001 NEW
!0 The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CANCEL/CALL] for 1 sec. to transmit the rou-
tine call.
Push and hold [ENT] for 1 sec. to store the calling con-
dition into the TX memory described in pages 23 and
43, if desired.
!1 After sending the call, the transceiver waits for an
acknowledgement.
!2 When receiving an acknowledgement, the display
shows the received ID code, or the called station
name.
Push [FREQ/CH];
-to select the traffic frequency if the called station is
able to comply to the call.
- to return to DSC watch mode when unable.
!3 Announce the following message to stations.
- The 9-digit identity (or call sign or other identi-
cation) of the station which you want to call.
- This is ..... (your ship name).
- The 9-digit identity OR call sign (or other identi-
cation of the ship).
When no acknowledgement is received:
q Wait for 5 min., then call again on the same or
a different frequency.
w If no acknowledgement is received after a 2nd
call, wait for at least 15 min. before repeating
the call.
************************
*
Individual
ACK
*
*
IC-M802
*
*
Able
to
comply
*
************************
Exit
************************
*
Individual
ACK
*
*
IC-M802
*
*
Unable
to
comply
*
*
Operator
unavailable
*
************************
Exit
When the called station is unable to comply
to the call, the reason may be displayed.
RX
J2B
GPS
<
Wait
for
ACK
>
Individual
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
******
Individual
******
---------
Call
---------
Category:Routine
To:987654321
Traffic:J3E
TX
4567.0kHz
RX
4567.0kHz
Call
Freq:TX
2345.0kHz
RX
2345.0kHz
Write-Menu
Call
IC-M802_USA.qxd 02.7.9 10:58 Page 33
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info