Manual Icom IC-7800 (page 51 of 206) (English)

12376

Zoom out

Zoom in

1/206

Convenient functions for transmit

About 5 MHz band operation (USA version only)

Operation on the 5 MHz band is allowed on 5 discrete

frequencies and must adhere to the following:

• USB mode

• Maximum of 50 watts ERP (Effective Radiated Power)

• 2.8 kHz bandwidth

It’s your responsibility to set all controls so that trans-

mission in this band meets the stringent conditions

under which we may use these frequencies.

NOTE: We recommend that you store these fre-

quencies, mode and filter settings into memory

channels for easy recall.

*The FCC specifies center frequencies on the

5 MHz band. However, the IC-7800 displays carri-

er frequency. Therefore, tune the transceiver to

1.5 kHz below the specified FCC channel center

frequency.

• Speech compressor (p. 6-5)

➥ Push [COMP] to turn the speech compressor ON

and OFF.

• Pushing [COMP] for 1 sec. to select the compression

bandwidth from wide, middle and narrow.

• VOX (voice operated transmit) (p. 6-2)

➥ Push [VOX/BK-IN] to turn the VOX function ON

and OFF.

• “VOX” appears when the VOX function is ON.

• Transmit quality monitor (p. 6-4)

➥ Push [MONI] to turn the monitor function ON and

OFF.

• Rotate [MONI GAIN] to adjust the monitor gain.

• Monitor indicator (above [MONI] switch) lights when

the monitor function is ON.

• Audio tone control (p. 12-4)

➥ Push [F-7•SET] then [F-1•LEVEL] to enter level

set mode. Select an item with [F-1•Y]/[F-2•Z]

then rotate the main dial to adjust the audio tone.

4-3

RECEIVE AND TRANSMIT

IC-7800 Tuning FCC Channel

Frequency* Center Frequency*

5.33050 MHz 5.33200 MHz

5.34650 MHz 5.34800 MHz

5.36650 MHz 5.36800 MHz

5.37150 MHz 5.37300 MHz

5.40350 MHz 5.40500 MHz

To assist you in operating the 5 MHz band within the

rules specified by the FCC, transmission is illegal on

any 5 MHz band frequency other than the 5 fre-

quencies indicated in the table above.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: