670155
16
Zoom out
Zoom in
Previous page
1/232
Next page
1-6
#3 MULTI-FUNCTION SWITCHES
Push to select the functions indicated in the LCD
display to the right of these switches.
•Functionsvarydependingontheoperatingcondition.
MF1 (MULTI-FUNCTION 1 SWITCH)
➥ Selects the antenna connector from
ANT1, ANT2, ANT3 and ANT4 when
pushed. (p. 10-2)
➥ Displays the antenna selection mem-
ory when held down for 1 second.
•Whenthereceiveantennaisactivated,
the antenna connected to [ANT4] is
used for receive only.
When a transverter is in use, this [ANT]
doesnotfunctionand‘TRV’appears.
MF2 (MULTI-FUNCTION 2 SWITCH)
➥ Selects the RF power (Po), SWR,
ALC,COMP,Vd or Id metering func-
tions during transmit. (p. 3-10)
➥ Switches the multi-function digital
meter ON or OFF when held down for
1 second. (p. 3-10)
MF3 (MULTI-FUNCTION 3 SWITCH)
➥ Selects one of 2 receive RF preamps
or bypasses them. (p. 5-10)
•“P.AMP1”activates10dBpreamp.
P.AMP2”activates16dBhigh-gain
preamp.
➥ Turns the preamp function OFF when
held down for 1 second. (p. 5-10)
What is the preamp?
The preamp amplifies signals in the receiver front end to
improve S/N ratio and sensitivity. Select “P. AMP1” or “P.
AMP2” when receiving weak signals.
MF4 (MULTI-FUNCTION 4 SWITCH)
➥ Selects a 6 dB, 12 dB or 18 dB at-
tenuator when pushed. (p. 5-10)
➥
Turns the attenuator function OFF
when held down for 1 second. (p. 5-10)
What is the attenuator?
The attenuator prevents a desired signal from being dis-
torted when very strong signals are near the desired fre-
quency, or when very strong electromagnetic fields, such
as from a broadcasting station, are near your location.
ATT
OFF
P.AMP
1
METER
Po
ANT
1
1PANEL DESCRIPTION
POWER
TUNER
TIMER
VOX
SSB CW
RTTY/PSK
AM/FM DATA AUTO
TUNE
LOCK
TS
XFC
M.SCOPE
EXIT/SET
REC
PLAY
VOICE MEMORYBRIGHTCONTRASTVOX GAINMONI GAINCOMPDRIVE ANTI VOX
BK-IN MONITOR
TRANSMIT
MIC
ELEC-KEY
PHONES
AF RF
MIC RF
PWR
DIGI-SEL NOTCH
RIT/TX
CW PITCH
TWIN-PBT
KEY
SPEED
DELAY
F-1F-2 F-3F-4 F-5F-6 F-7
LOCKTX RX SPLIT
AGC VR
NR
FILTER
PBT-CLR
DIGI-SEL
APF/TPF
NOTCH
RIT
CLEAR
SPEECH
1
1.8
2
3.5
3
7
4
10
5
14
6
18
7
21
8
24
MP-W MP-R
MW V/M
A/B A=B
9
28
GENE
0
50
ENT
F-INP
TX
NB
SPLIT
i7700
HF/50MHz TRANSCEIVER
AGC SQL NR NB
#3 #4 #5 #6 #8#7 #9 $0 $1 $2
Front panel (continued)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7700 in the language / languages: English as an attachment in your email.

The manual is 23,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info