670155
15
Zoom out
Zoom in
Previous page
1/232
Next page
1-5
@1 NOISE REDUCTION SWITCH NR (p. 5-18)
Push to switch DSP noise reduction ON or OFF.
•The[NR]indicatorabovethisswitchlightsgreenwhen
the function is activated.
@2 AF CONTROL [AF] (inner control; p. 3-9)
Varies theaudiooutputlevelofthespeakeror
headphones.
Audio output
increases
Audio output
decreases
@3 RF GAIN CONTROL [RF] (outer control; p. 3-9)
Adjusts the RF gain level.
While rotating the RF gain control, you may hear
noise. This comes from the DSP unit and does
not indicate a malfunction.
Sensitivity
increases
Sensitivity
decreases
@4 NOISE BLANKER SWITCH NB (p. 5-17)
Switches the noise blanker ON or OFF when
pushed. The noise blanker reduces pulse-type
noise such as that generated by automobile ig-
nition systems. This function cannot be used in
the FM mode, or on non-pulse-type noise.
•The[NB]indicatorabovethisswitchlightsgreen
while the function is activated.
➥ Enters the blanking-width set mode when held
down for 1 second.
@5 DRIVE GAIN CONTROL [DRIVE] (p. 3-13)
Adjusts the transmitter level at the driver stage.
Active in all modes (other than the SSB mode with
[COMP] OFF).
Decreases
Increases
Push
@6 COMPRESSION LEVEL CONTROL [COMP]
(p. 6-5)
Adjusts the speech compression level in SSB.
Compression
gain decreases
Compression
gain increases
Push
@7 MONITOR GAIN CONTROL [MONI GAIN] (p. 6-4)
Adjusts the transmit IF signal monitor level.
Monitor gain
decreases
Monitor gain
increases
Push
@8 VOX GAIN CONTROL [VOX GAIN] (p. 6-2)
Adjusts the transmit and receive switching thresh-
oldlevelforVOXoperation.
Low
sensitivity
High
sensitivity
Push
@9 ANTI VOX CONTROL [ANTI VOX] (p. 6-2)
AdjuststheVOXsensitivitytothespeakeraudio,to
preventunwantedVOXactivation.
‘More sensitive’
and confirm proper operation
‘Less sensitive’
and confirm
proper operation
Push
#0 LCD CONTRAST CONTROL [CONTRAST]
Adjusts the LCD contrast.
Low
contrast
High
contrast
Push
#1 LCD BRIGHTNESS CONTROL [BRIGHT]
Adjusts the LCD brightness.
Darker
Brighter
Push
#2 AUTOMATIC TUNING SWITCH [AUTOTUNE]
(p. 5-22)
Turns the automatic tuning function ON or OFF in
the CW and AM modes.
IMPORTANT!
When receiving a weak signal, or receiving a sig-
nal with interference, the automatic tuning func-
tion may tune the receiver to an undesired signal.
1
PANEL DESCRIPTION
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7700 in the language / languages: English as an attachment in your email.

The manual is 23,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info