670162
64
Zoom out
Zoom in
Previous page
1/180
Next page
D PSK memory transmission
Pre-set characters can be sent using the PSK memory.
Contents of the memory are set using the edit menu.
q
During PSK mode operation, push [DECODE] (F-3)
to select PSK decode screen.
w
Push [TX MEM] (F-3) to select PSK memory screen.
e Push [1–4/5–8] (F-6) to select memory bank then
push one of the function keys ([PT1] (F-1) to
[PT4] (F-4) or [PT5] (F-1) to [PT8] (F-4)).
When no keyboard is connected, the selected memory
contents will be transmitted immediately.
When a keyboard is connected, the memory contents
will be transmitted immediately when
[F1] to [F8] on
the
connected keyboard is pressed, or transmitted after
[F12] is
pressed, depending on auto transmission/
reception setting (see below).
The transmission date, time, reception date and/or time
may be displayed in RX contents screen, depending on
setting.
For your information
When an external keypad is connected to [MIC] con-
nector on the front panel, the programmed contents,
PT1—PT4, can be transmitted. (pgs. 18, 133)
or
F-3 F-6
F-1 F-4
PT1 PT4
F-1 F-4
PT5 PT8
/
DECODE TX MEM 1–4/5–8
D Automatic transmission/reception setting
q
During PSK mode operation, push [DECODE] (F-3)
to select PSK decode screen.
w Push [TX MEM] (F-3) to select PSK memory
screen, then push [EDIT] (F-5) to select PSK mem-
ory edit screen.
PSK memory contents of Channel 1 (PT1) is selected.
e Push [PT1..PT8] (F-6) several times to select the
desired PSK memory.
r Push [AUTO TX] (F-5) several times to select the
desired condition, as follows.
AUTO TX/RX : Automatically transmits the
selected memory and returns to
receive after the transmission.
AUTO TX : Automatically transmits the
selected memory. To return to
receive, press [F12] on the key-
board.
AUTO RX : Press [F12] on the keyboard
to transmit the selected memory.
Automatically returns to receive
after the transmission.
No indication : Press [F12] on the keyboard
to transmit the selected memory
and press [F12] again to return to
receive.
t Push [EXIT/SET] to return to exit from PSK mem-
ory edit condition.
NOTE: The transceiver always functions in the
“AUTO TX/RX” setting when no keyboard is con-
nected.
EXIT/SET
F-3 F-6
F-5
/
DECODE TX MEM
AUTO TXEDIT
/
PT1..PT8
Auto TX/RX settings
57
4
RECEIVE AND TRANSMIT
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info