670162
63
Zoom out
Zoom in
Previous page
1/180
Next page
D Functions for the PSK decoder indication
q Push a band key to select the desired band.
w Push [RTTY/PSK] to select PSK.
After PSK mode is selected, push and hold [RTTY/
PSK] for 1 sec. to toggle between PSK and PSK-R
modes.
“PSK” or “PSK-R” appears.
e Push [DECODE] (F-3) to display the decode
screen.
When tuned into a PSK signal, decoded characters are
displayed in the RX contents screen.
r Push [HOLD/CLR] (F-2) to freeze the current
screen.
” appears while the function is in use.
Push [HOLD/CLR] (F-2)
again to release the function.
t Push and hold [HOLD/CLR] (F-2) for 1 sec. to
clear the displayed characters.
indicator disappears at the same time when
the hold function is in use.
y Push [WIDE] (F-6) to toggle the PSK decode
screen size from normal and wide.
S/RF meter type during wide screen indication can be
selected in display set mode. (p. 129)
u Push [AFC/NET] (F-5) to turn the AFC function
ON.
” appears.
If a PSK signal is received within the AFC tuning range,
the decoder automatically tunes into the signal and the
offset frequency is displayed.
The AFC tuning range is set to ±15 Hz as the default.
Optional ±8 Hz setting is available in PSK decode set
mode. (p. 59)
NOTE: The AFC function may not tune the signal
properly when a weak PSK signal is received.
i Push [AFC/NET] (F-5) again to turn the NET func-
tion ON.
” appears additionally.
o Push and hold [AFC/NET] (F-5) for 1 sec. to add
the offset frequency to the displayed frequency.
!0 Push [EXIT/SET] to close the PSK decode screen.
D Setting the decoder threshold level
Adjust the PSK decoder threshold level if some char-
acters are displayed when no signal is received.
q Call up the PSK decode screen as described
above.
w Push [ADJ] (F-4) to select the threshold level set-
ting condition.
e Rotate the main dial to adjust the PSK decoder
threshold level.
Push and hold [DEF] (F-5) for 1 sec. to select the
default setting.
r Push [ADJ] (F-4) to exit from the threshold level
setting condition.
EXIT/SET
F-3 F-6F-5
Band keys
F-2
RTTY/PSK
HOLD/CLR
WIDEDECODE AFC/NET
AFC/NET indications
“AFC” and “NET”
indicators
Offset frequency
Main dial
F-4 F-5
DEFADJ
Threshold level indication bar
56
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info