670162
66
Zoom out
Zoom in
Previous page
1/180
Next page
D PSK decode set mode
This set mode is used to set the PSK AFC range,
time stamp setting, etc.
Setting contents
q
During PSK mode operation, push [DECODE] (F-3)
to select PSK decode screen.
w Push [<MENU1>] (F-1) to select the second
PSK
decode menu, then push [SET] (F-5) to select
PSK
decode set mode.
Push [WIDE] (F-6) to toggle the screen size from nor-
mal and wide.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
r Set the desired condition using the main dial.
Push and hold [DEF] (F-4) for 1 sec. to select a default
condition or value.
Push [ ] (F-3) to select the set contents for some
i
tems.
t Push [EXIT/SET] to exit from set mode.
F-1 F-2 F-4F-3
DEF
EXIT/SETF-3
F-6
F-1
F-5
Main dial
DECODE
<MENU1>
SET
WIDE
PSK FFT Scope Averaging OFF
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning, using
the default or smaller averaging setting is recom-
mended.
PSK FFT Scope Waveform Color
51 153 255
Set the color for the FFT scope waveform.
The color is set in RGB format.
The set color is indicated in the box beside the RGB
scale.
Push
[ ] (F-3)
to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
PSK AFC Range ±15Hz
Select the AFC (Automatic Frequency Control)
function operating range from ±15 Hz (default) and
±8 Hz.
NOTE: The AFC function may not tune the signal
properly when a weak PSK signal is received.
PSK Time Stamp ON
Turn the time stamp (date, transmission or reception
time) display ON and OFF.
ON : Displays the time stamp.
OFF : No time stamp display.
PSK Time Stamp (Time) Local
Selects the clock display for time stamp usage.
NOTE: The time won’t be displayed when “OFF” is
selected in “PSK Time Stamp” as above.
Local : Selects the time that set in “Time (Now).”
UTC* : Selects the time that set in “CLOCK2.”
* The name of choice may differ according to
“CLOCK2 Name” setting (p. 115). “UTC” is the
default name of CLOCK2.
59
4
RECEIVE AND TRANSMIT
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info