670164
90
Zoom out
Zoom in
Previous page
1/104
Next page
12
85
TROUBLESHOOTING
The following chart is designed to help you correct
problems which are not equipment malfunctions.
If you are unable to locate the cause of a problem
or solve it through the use of this chart, contact your
nearest Icom Dealer or Service Center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
POWER SUPPLY
Power does not come
on wh en [PW R] is
pushed.
DC power cable is improperly connected.
• Reconnect the power cable correctly. p. 15
• Fuse is blown.
Check for the cause, then replace the
fuse with a spare one.
(Fuse is installed in the DC power cable)
p. 83
Battery is exhausted if you are using a
12 V battery as the power source.
• Check the battery voltage.
RECEIVE
No sound comes from
the speaker.
Volume level is set too low. Rotate [AF] clockwise to obtain a suit-
able listening level.
p. 29
The squelch level is closed.
Rotate [RF/SQL] to 12 o’clock position
to open the squelch.
p. 30
The transceiver is in the transmit mode.
Release [PTT] on the microphone or
check the SEND line of an external unit,
if connected.
An external speaker or headphones are
connected.
Check the external speaker or head-
phone plug connection.
p. 14
Sensitivity is too low,
and only strong signals
are audible.
The antenna is not connected properly. • Reconnect to the antenna connector.
The antenna feed line is cut or shorted.
Check the feed line and correct any im-
proper conditions.
The antenna is not properly tuned.
Push
TUNER
to manually tune the an-
tenna.
p. 67
The attenuator function is activated.
Push
P.AMP
ATT
to turn the function OFF.
p. 45
T
he antenna for another band is se-
lected.
Select an antenna suitable for the oper-
ating frequency.
p. 67
Receive audio is dis-
torted.
The
operating mode is not selected cor-
rectly.
• Select a suitable operating mode. p. 29
Receive signal is dis-
torted by strong sig-
nals.
The
noise reduction is activated and the
noise reduction level is too high.
Set the noise reduction level for maxi-
mum readability.
p. 50
• Noise blanker function is activated.
• Push
NB
to turn the function OFF.
p. 49
• Preamp is activated.
Push
P.AMP
ATT
to turn the function OFF.
p. 45
The shift frequency of
the RIT function cannot
be added/subtracted.
The XFC (transmit frequency check
function) is turned ON.
T
urn the XFC (transmit frequency check
function) OFF in set mode.
p. 76
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info