670168
87
Zoom out
Zoom in
Previous page
1/96
Next page
6
SET MODE
6-5
Function In this item, set the function options.
Monitor OFF or ON Selects whether or not to monitor your transmit
signal in any mode other than CW.
Monitor Level 0%~50%~100% Sets the monitor level.
Beep Level 0%~50%~100% Sets the beep output level.
Beep Level Limit OFF or ON Selects whether or not to limit the volume to the
specified level, and further rotation of the [AF]
control will not increase the level.
Beep (Confirmation) OFF or ON Turns the confirmation beep tones ON or OFF.
Band Edge Beep OFF, ON (Default), ON (User) or ON
(User)&TXLimit
Selects whether or not to sound a beep when you
tune outside of, or back into the amateur band's
frequency range.
User Band Edge 1: 1.800.000–1.999.999
2: 3.500.000–3.999.999
3: 5.255.000–5.405.000
4: 7.000.000–7.300.000
5: 10.100.000–10.150.000
6: 14.000.000–14.350.000
7: 18.068.000–18.168.000
8: 21.000.000–21.450.000
9: 24.890.000–24.990.000
10: 28.000.000–29.700.000
11: 50.000.000–54.000.000
12:
144.000.000
148.000.000
13:
430.000.000
450.000.000
14~30: (blank)
Selects the user band frequency range to sound
a beep when the Band Edge Beep function is
setto“ON(User)”or“ON(User)&TXLimit,”and
you tune outside of, or back into a programmed
range.
RF/SQLControl Auto,SQLorRF+SQL Selectthefunctionofthe[RF/SQL]control.
TX Delay
HF OFF, 10ms, 15ms, 20ms, 25ms or
30ms
Sets the transmission’s timing of the IC-7100 to
prevent any external equipment that is connected
from damage by the transmitted RF.
50M OFF, 10ms, 15ms, 20ms, 25ms or
30ms
See HF above.
144M OFF, 10ms, 15ms, 20ms, 25ms or
30ms
See HF above.
430M OFF, 10ms, 15ms, 20ms, 25ms or
30ms
See HF above.
Time-Out Timer OFF, 3min, 5min, 10min, 20min or
30min
Selects the Time-Out Timer time options to pre-
vent an accidental prolonged transmission.
PTT Lock OFF or ON Selects whether or not to inhibit transmission.
SPLIT/DUP
QuickSPLIT OFF or ON TurnstheQuickSPLITfunctionONorOFF.
SPLIT Offset –9.999MHz~0.000 MHz~+9.999MHz Sets the frequency offset for the Split function.
SPLIT LOCK OFF or ON Turns the SPLIT LOCK function ON or OFF.
DUP Offset
0.0000MHz~9.9999MHz
( The default value may differ, depend-
ing on the frequency band and the
transceiver version.)
Sets the frequency offset for repeater operation.
One Touch Repeater DUP– or DUP+ Selects the duplex direction for the One Touch
Repeater function.
Auto Repeater OFF, ON (DUP) or ON (DUP,TONE) Turns the Auto Repeater function ON or OFF.
Tuner
Auto Start OFF or ON Turns the automatic antenna tuner function ON
or OFF.
Set mode items and Default settings (Continued)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info