670168
85
Zoom out
Zoom in
Previous page
1/96
Next page
6
SET MODE
6-3
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
Call sign (AI sec. 9)
RX History (AI sec. 9)
MY Station (Section 4)
GPS (AI sec. 10)
SD Card (AI sec. 13)
Voice Memo In this item, set the TX/RX voice recording options.
QSORecorder
<<REC Start>>* Starts recording the TX/RX audio.
Play Files*
Selects to playback or delete the recorded audio.
Recorder Set
REC Mode TX&RX or RX Only Selects to record the TX audio or not.
RX REC Condition Always or Squelch Auto Selects whether or not the squelch status affects
the RX voice audio recording.
File Split OFF or ON Selects whether or not to automatically create
a new file after each transmission, reception, or
each time the squelch opens or closes.
Even if
the squelch is closed, a new file is created when
the “RX REC Condition” item is set to “Squelch
Auto.
PTT Auto REC OFF or ON Turns the PTT Automatic Recording function ON
or OFF.
Player Set
Skip Time 3sec, 5sec, 10sec or 30sec Sets the Skip time to rewind or forward the re-
corded audio when you push the fast-rewind or
fast-forward key during playback.
DV Auto Reply* Records a voice audio to use for the Auto Reply
function in the DV mode.
* Be sure to insert the SD card into the transceiver before selecting these items.
DV Set In this item, set infrequently changed values or functions in the DV mode.
Standby Beep OFF, ON or ON (to me: High Tone) Selects whether or not to sound a beep after a
received signal disappears.
Auto Reply OFF, ON or Voice Selects whether or not to automatically reply to a
call addressed to your own call sign.
DV Data TX PTT or Auto Selects to manually or automatically transmit low
speed data.
Digital Monitor Auto, Digital or Analog Selects the DV mode RX monitoring when [XFC]
is held down.
Digital Repeater Set OFF or ON Turns the digital repeater setting function ON or
OFF. This function is usable in any DV mode ex-
cept the DR mode.
RX Call Sign Write OFF or Auto Turns the RX call sign automatic write function
ON or OFF. This function is usable in any DV
mode except the DR mode.
RX Repeater Write OFF or Auto Turns the repeater call sign automatic write func-
tion ON or OFF. This function is usable in any DV
mode except the DR mode.
DV Auto Detect OFF or ON Turns the DV mode automatic detect function ON
or OFF.
RX Record (RPT) ALL or Latest Only Selects whether to record all calls or only the lat-
est call, when the received signal includes a sta-
tusmessage(“UR?”or“RPT?”)thatissentback
from the access repeater.
BK OFF or ON Turns the BK (Break-in) function ON or OFF.
The BK function allows you to break into a con-
versation between two stations with call sign
squelch enabled.
EMR OFF or ON Turns the EMR (Enhanced Monitor Request)
communication mode ON or OFF.
EMR AF Level 0%~50%~100% Sets the audio output level when an EMR mode
signal is received.
Set mode items and Default settings
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info